Llawlyfr Cyfarwyddiadau Lantern Wal Awyr Agored Progress Lighting P6071-31

Rhagymadrodd

This manual provides detailed instructions for the installation, operation, and maintenance of your Progress Lighting P6071-31 outdoor wall lantern. Please read this manual thoroughly before beginning installation or use to ensure proper function and safety.

For your safety, always follow local electrical codes and consult a qualified electrician if you are unsure about any part of the installation process.

Gwybodaeth Diogelwch

RHYBUDD: Always turn off power at the main circuit breaker before installing, cleaning, or servicing this fixture. Failure to do so may result in serious injury or death.

RHYBUDD: Rhaid i'r cynnyrch hwn gael ei osod yn unol â'r cod gosod cymwys gan berson sy'n gyfarwydd ag adeiladu a gweithredu'r cynnyrch a'r peryglon dan sylw.

PWYSIG: Inspect wire insulation for any cuts, abrasions, or exposed copper that may have occurred during shipping. If there is a defect in the wire's insulation, do not attempt installation. Contact customer service.

This fixture is designed for outdoor use and is suitable for wet locations. Ensure all connections are properly sealed to prevent water intrusion.

Cynnwys Pecyn

Gwiriwch fod yr holl gydrannau yn bresennol cyn dechrau'r gosodiad.

Light Fixture Assembly
Pecyn Caledwedd Mowntio (sgriwiau, cnau gwifren, strap mowntio)
Cyfarwyddiadau Gosod

Diagram showing all components included in the package for the outdoor wall lantern.

Ffigur 1: Wedi ffrwydro view of the P6071-31 outdoor wall lantern components.

Manylebau

Priodoledd	Gwerth
Brand	Goleuadau Cynnydd
Model	P6071-31
Lliw	Du
Deunydd	Alwminiwm
Arddull	Traddodiadol
Ffurflen Gosodion Ysgafn	Wal
Dimensiynau (tua)	Height: 9-1/8", Width: 5-1/2", Depth from wall: 6-1/2"
Math Bylbiau	Incandescent, 100W Medium Base (Max)
Cyftage	120V
Graddio Lleoliad	cCSAus Wet location listed

Dimensional drawing of the Progress Lighting P6071-31 outdoor wall lantern showing height, width, and depth measurements.

Figure 2: Product dimensions for the P6071-31 fixture.

Gosod a Gosod

Before you begin, ensure the power is turned off at the circuit breaker. This fixture is designed for wall mounting over a standard 4" hexagonal recessed outlet box.

Paratowch y strap gosod: Attach the mounting strap to the outlet box using the provided mounting screws. Ensure the strap is securely fastened.
Creu Cysylltiadau Trydanol:
- Connect the bare copper or green ground wire from the fixture to the green ground screw on the mounting strap.
- Connect the white wire from the fixture to the white (neutral) supply wire using a wire nut.
- Connect the black wire from the fixture to the black (hot) supply wire using a wire nut.
- Rhowch bob gwifren yn ofalus yn y blwch allfa.
Gosod y gêm: Align the fixture with the mounting strap and secure it with the provided mounting screws. Ensure the fixture is flush against the wall and sealed to prevent water entry, especially in wet locations.
Gosod y Bwlb: Screw in a medium base incandescent bulb (max 100W) into the socket. Do not overtighten.
Adfer Pwer: Trowch y pŵer yn ôl ymlaen yn y prif dorrwr cylched.

Detailed diagram showing the electrical wiring connections and mounting steps for the outdoor wall lantern.

Figure 3: Installation diagram for the P6071-31 outdoor wall lantern.

Cyfarwyddiadau Gweithredu

Once installed and power is restored, the fixture can be operated via the wall switch connected to the circuit. This fixture does not include a built-in switch or sensor.

Ensure the light bulb is securely screwed into the socket.
Use a standard wall switch to turn the light fixture on or off.
For optimal performance and longevity, use bulbs within the specified wattage amrediad.

Cynnal a chadw

Regular maintenance will help preserve the appearance and functionality of your outdoor wall lantern.

Glanhau: To clean the fixture, turn off the power at the circuit breaker. Wipe the fixture with a soft, damp cloth. Do not use abrasive cleaners or solvents as they may damage the finish or glass. For glass panels, a mild glass cleaner can be used.
Amnewid Bylbiau: Turn off the power at the circuit breaker and allow the bulb to cool before replacing. Unscrew the old bulb and screw in a new medium base incandescent bulb (max 100W). Do not exceed the maximum wattage.
Arolygiad: Periodically inspect the fixture for any signs of wear, damage, or loose connections. Ensure the seal around the mounting surface remains intact to prevent water intrusion.

Yn agos view of the Progress Lighting P6071-31 outdoor wall lantern, highlighting the black finish and clear water glass panels.

Figure 4: The P6071-31 fixture, showing details of the finish and glass for cleaning reference.

Datrys problemau

Os byddwch chi'n dod ar draws problemau gyda'ch gosodiad, cyfeiriwch at y problemau a'r atebion cyffredin canlynol:

Problem	Achos Posibl	Ateb
Nid yw golau yn troi ymlaen.	Mae'r pŵer i ffwrdd wrth y torrwr cylched. Cysylltiadau gwifren rhydd. Bwlb diffygiol. Switsh wal diffygiol.	Check circuit breaker and ensure it is in the "ON" position. Turn off power, check all wire connections and tighten if necessary. Replace bulb with a new, working one. Consult a qualified electrician to check the switch.
Fflachiadau golau.	Bwlb rhydd. Cysylltiadau gwifren rhydd. Math/wat anghywir o fylbiautage.	Tynhau bwlb yn y soced. Turn off power, check and tighten wire connections. Sicrhewch fod y bwlb o'r math a'r wat cywirtage (max 100W incandescent).
Mae'r gosodiad yn hwmio.	Mowntio rhydd. Switsh pylu anghydnaws (os yn berthnasol).	Ensure fixture is securely mounted to the outlet box. If using a dimmer, ensure it is compatible with incandescent loads.

Gwarant a Chefnogaeth

Mae'r cynnyrch hwn wedi'i gwmpasu gan a Gwarant Cyfyngedig 1 mlynedd from the date of purchase. This warranty guarantees your complete satisfaction and includes professional after-sales customer service support.

For warranty claims, technical assistance, or any questions regarding your Progress Lighting P6071-31 fixture, please contact Progress Lighting customer service. Please have your model number (P6071-31) and proof of purchase ready when contacting support.

You can find more information and contact details on the official Progress Lighting websafle: www.progresslighting.com

Goleuadau Cynnydd P6071-31