1. Cynnyrch Drosview
The Permatex 81160 High-Temp Red RTV Silicone Gasket Maker is a specialized sealant designed for heavy-duty applications requiring resistance to extreme temperatures. This product forms reliable gaskets that can withstand intermittent temperatures ranging from -65°F i 650°F (-54°C i 343°C).
It is formulated to create durable, flexible, and waterproof seals for various automotive and industrial repair needs.
Image 1.1: Permatex 81160 High-Temp Red RTV Silicone Gasket tube. This image shows the product packaging, highlighting the brand, product name, and key features.
2. Gwybodaeth Diogelwch
Always read and understand all safety precautions before using this product. Use personal protective equipment as required.
2.1. Precautionary Statements - Prevention
- Contains: Calcium carbonate, Iron oxide.
- Cael cyfarwyddiadau arbennig cyn ei ddefnyddio.
- Peidiwch â thrafod nes bod yr holl ragofalon diogelwch wedi'u darllen a'u deall.
- Defnyddiwch offer amddiffynnol personol yn ôl yr angen.
2.2. Precautionary Statements - Response
- OS YN LLYGAD: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists, get medical advice/attention.
- OS AR Y CROEN: Wash with plenty of soap and water. If skin irritation or rash occurs, get medical advice/attention. Wash contaminated clothing before reuse.
2.3. Precautionary Statements - Storage
- Diogelu rhag golau'r haul.
- Storio mewn lle wedi'i awyru'n dda.
- Storfa dan glo.
- Cadwch allan o gyrraedd plant.
3. Gosod
3.1. Paratoi Arwyneb
For optimal results, ensure that all surfaces where the gasket maker will be applied are yn lân ac yn sych. Remove any old gasket material, grease, oil, or other contaminants that could interfere with adhesion.
4. Cyfarwyddiadau Cais
- Prepare Nozzle: Torrwch y ffroenell i'r maint gleiniau a ddymunir.
- Apply Gasket Maker: Apply a continuous bead of silicone, approximately 1/16" to 1/4" (2 to 6mm) thick, to one surface. Ensure the bead surrounds all bolt holes.
- Cydosod Rhannau: Immediately assemble the parts while the silicone is still wet.
- Tynhau Cychwynnol: Finger tighten the assembly until the material begins to squeeze out around the flange.
Delwedd 4.1: Enghraifftample of Permatex 81160 High-Temp Red RTV Silicone Gasket application. This image illustrates the product being applied as a continuous bead on a surface.
5. Curing and Finishing
- Initial Dry Time: Allow the gasket maker to dry for un awr.
- Tynhau Terfynol: After the initial dry time, tighten the assembly to the manufacturer's specified torque.
- Amser iachâd Llawn: Caniatáu 24 awr for the gasket maker to fully cure before filling with fluids or returning the component to service.
6. cynnal
6.1. Storio Cynnyrch
Ar ôl pob defnydd, replace the cap securely to prevent the product from drying out. Store the tube in a cool, dry, well-ventilated area, away from direct sunlight and out of reach of children.
7. Troubleshooting and Limitations
Nodyn Pwysig: Mae'r cynnyrch hwn yn NOT recommended for use on head gaskets or on parts that will come into direct contact with gasoline. Using the product in these applications may lead to product failure and potential damage.
8. Manylebau Cynnyrch
| Nodwedd | Manylyn |
|---|---|
| Enw Cynnyrch | Permatex High-Temp Red RTV Silicone Gasket Maker |
| Rhif Model | 81160 |
| Brand | Permatex |
| Deunydd | Silicôn |
| Lliw | Coch |
| Temperature Range (Intermittent) | -65°F i 650°F (-54°C i 343°C) |
| Amser Iachâd Llawn | 24 Awr |
| Cyfrol Eitem | 3 Owns Hylif |
| Lefel Gwrthsefyll Dŵr | Dal dwr |
| UPC | 686226811608 |
9. Gwybodaeth Gwaredu
Dispose of contents and container in accordance with local regulations and to an approved waste disposal plant. Do not dispose of in household waste.
10. Cyswllt a Chefnogaeth
For further assistance or inquiries, please contact Permatex:
- Gwneuthurwr: Permatex Chemicals, a division of ITW
- Cyfeiriad: Solon, OH 44139, USA
- Di-doll: 866-732-9502
- Websafle: www.permatex.com
Permatex and its design are trademarks of Illinois Tool Works Inc. The product is assembled in the U.S.A. with U.S. and global materials.
11. Gwybodaeth Gwarant
Specific warranty details for Permatex products are typically available on the manufacturer's official website or by contacting their customer support directly. Please refer to www.permatex.com neu ffoniwch 866-732-9502 for the most current warranty information.