TCM Tchibo Digital Radio Clock with Motion Sensor, LCD, and Crescendo Alarm

Rhagymadrodd

Thank you for choosing the Tchibo Digital Radio Clock. This device combines a precise digital clock with a radio function and a convenient motion sensor for display illumination. This manual provides detailed instructions for setup, operation, and maintenance to ensure optimal performance and longevity of your product.

Cyfarwyddiadau Diogelwch

• Read all instructions carefully before use and retain for future reference.
• Peidiwch ag amlygu'r ddyfais i ddŵr, lleithder uchel, na thymheredd eithafol.
• Use only the specified battery type. Ensure correct polarity when inserting batteries.
• Peidiwch â cheisio dadosod na thrwsio'r ddyfais eich hun. Cysylltwch â phersonél gwasanaeth cymwys.
• Cadwch allan o gyrraedd plant.
• Gwaredu batris yn gyfrifol yn unol â rheoliadau lleol.

Cynnwys Pecyn

Gwiriwch fod yr holl eitemau yn bresennol yn eich pecyn:

• Tchibo Digital Radio Clock (1 unit)
• Llawlyfr Cyfarwyddiadau (y ddogfen hon)
• Nodyn: Nid yw batris wedi'u cynnwys a rhaid eu prynu ar wahân.

Cynnyrch Drosview

Familiarize yourself with the main components of your radio clock:

Delwedd 1: Blaen view of the Tchibo Digital Radio Clock. The image displays the rectangular anthracite-colored clock with a clear LCD screen in the center. Below the screen, several control buttons are visible, likely for setting time, alarm, and radio functions. The overall design is modern and compact, suitable for a bedside table.

• Arddangosfa LCD: Yn dangos amser, statws larwm, ac amledd radio.
• Synhwyrydd Cynnig: Activates display backlight when motion is detected nearby.
• Botymau Rheoli: (e.g., SET, ALARM, MODE, TUNING, SNOOZE) - Specific button functions will be detailed in the "Operating" section.
• Adran Batri: Located on the back or bottom of the unit.

Gosod

1. Powering On (Battery Installation)

1. Lleolwch glawr adran y batri ar gefn neu waelod y cloc.
2. Agorwch y clawr.
3. Insert the required batteries (e.g., 2x AA or AAA, refer to the compartment label) ensuring correct polarity (+/-).
4. Caewch y clawr adran batri yn ddiogel.
5. The display should now light up, and the clock will attempt to synchronize the time automatically.

2. Cydamseru Amser Cychwynnol

Your radio clock is designed to automatically synchronize with a radio time signal. This process may take a few minutes, especially during the first setup or after battery replacement. Ensure the clock is placed near a window or in an area with good reception.

• During synchronization, an icon (e.g., an antenna symbol) may flash on the display.
• Once synchronized, the icon will become solid, and the correct time will be displayed.

3. Manual Time Setting (If Automatic Fails)

If the clock fails to synchronize automatically or if you wish to set the time manually:

1. Pwyswch a dal y GOSOD button for approximately 3 seconds until the hour digits start flashing.
2. Defnyddiwch y UP or I LAWR buttons (or similar, depending on model) to adjust the hour.
3. Gwasgwch GOSOD again to confirm the hour and move to the minute setting.
4. Addaswch y munudau gan ddefnyddio'r UP or I LAWR botymau.
5. Gwasgwch GOSOD to confirm and exit the time setting mode.

4. Gosod y Larwm

Your clock features a Crescendo alarm, which gradually increases in volume.

1. Pwyswch a dal y ALARM button for approximately 3 seconds until the alarm hour digits flash.
2. Defnyddiwch y UP or I LAWR botymau i osod yr awr larwm a ddymunir.
3. Gwasgwch ALARM again to confirm the hour and move to the minute setting.
4. Adjust the alarm minutes using the UP or I LAWR botymau.
5. Gwasgwch ALARM to confirm and exit alarm setting mode.
6. To activate/deactivate the alarm, briefly press the ALARM botwm. Bydd eicon larwm yn ymddangos/diflannu ar yr arddangosfa.

5. Radio Tuning

(Note: While the product is a "radio clock", specific radio tuning details are not provided. This section assumes basic functionality.)

1. Gwasgwch y RADIO or MODD button to switch to radio mode.
2. Defnyddiwch y DYNIO or I FYNY/I LAWR botymau i diwnio â llaw i'ch orsaf ddymunol.
3. Some models may have an auto-scan function; press and hold the DYNIO botwm i'w actifadu.

Gweithredu

1. Nodweddion Arddangos

• Arddangosfa LCD: The main display shows the current time, and when active, the alarm time or radio frequency.
• Motion Sensor Backlight: The display is designed to be dim in normal conditions to avoid disturbing sleep. To illuminate the display, wave your hand over the top of the clock or activate the motion sensor area. The backlight will activate for a few seconds.

2. Swyddogaethau Larwm

• Larwm Crescendo: When the alarm sounds, its volume will gradually increase over a short period to gently wake you up.
• Swyddogaeth Snooze: Pan fydd y larwm yn swnio, pwyswch y SNOOZE button (usually a large button on top). The alarm will pause for a set period (e.g., 5-10 minutes) and then sound again.
• Atal y Larwm: To turn off the alarm for the day, press any other button (e.g., ALARM, GOSOD) while it is sounding. The alarm will reset for the next day if it is still activated.

3. Radio Functions

• Switching to Radio: Gwasgwch y RADIO or MODD botwm i wrando ar y radio.
• Rheoli cyfaint: Defnyddiwch bwrpasol CYFROL +/- botymau neu'r I FYNY/I LAWR buttons in radio mode to adjust the sound level.
• Switching Off Radio: Gwasgwch y ODDI AR or MODD button again to return to clock display or turn off the radio.

Cynnal a chadw

1. Glanhau

• Wipe the clock with a soft, dry, or slightly damp brethyn.
• Do not use abrasive cleaners, solvents, or chemical sprays, as these can damage the surface and electronic components.
• Gwnewch yn siŵr nad oes unrhyw hylif yn mynd i mewn i'r ddyfais.

2. Amnewid Batri

• When the display becomes dim or functions become erratic, it's time to replace the batteries.
• Follow the "Powering On (Battery Installation)" steps in the Setup section to replace old batteries with new ones.
• Gwaredwch batris ail-law yn unol â rheoliadau amgylcheddol lleol.

Datrys problemau

Manylebau

Gwarant a Chefnogaeth

This product is covered by a standard manufacturer's warranty. Please refer to the warranty card included with your purchase or contact your retailer for specific warranty terms and conditions.

For technical support or service inquiries, please contact the retailer where you purchased the product or visit the official Tchibo websafle ar gyfer gwybodaeth am wasanaeth cwsmeriaid.