1. Rhagymadrodd
Thank you for choosing the TecTake 401163 Tilting TV Wall Mount. This manual provides essential information for the safe and correct installation and use of your new wall mount. Please read these instructions carefully before beginning installation and retain them for future reference.
2. Gwybodaeth Diogelwch
- Ensure the wall structure can safely support the combined weight of the mount and the display. Consult a professional if unsure.
- Peidiwch â bod yn fwy na'r cynhwysedd llwyth uchaf o 100 kg (220 lbs).
- Always use appropriate safety gear, including eye protection, during installation.
- Cadwch blant ac anifeiliaid anwes i ffwrdd o'r ardal waith yn ystod y gosodiad.
- Verify that no electrical wires or plumbing are present in the drilling area.
- Tighten all screws firmly but do not overtighten to avoid stripping threads or damaging components.
- Mae'r cynnyrch hwn wedi'i gynllunio ar gyfer defnydd dan do yn unig.
3. Cynnwys Pecyn
Please check that all components are present and undamaged before installation. If any parts are missing or damaged, contact TecTake customer support.
- TecTake 401163 TV Wall Mount (pre-assembled)
- Complete Mounting Hardware Kit (screws, anchors, washers, spirit level)
- Detailed and Illustrated Assembly Instructions (this manual)
Figure 3.1: Included Mounting Hardware
4. manylebau
| Nodwedd | Manyleb |
|---|---|
| Rhif Model | 401163 |
| Cydnawsedd VESA | 50x50 mm i 400x400 mm |
| Cydweddoldeb Maint Sgrin | 32" - 55" (81 cm - 140 cm) |
| Cynhwysedd Llwyth Uchaf | 100 kg (220 pwys) |
| Pellter o'r Wal | 2.7 cm (Ultra-flat design) |
| Deunydd | Dur aloi |
| Pwysau Cynnyrch | Tua. 1.1 kg (2.4 pwys) |
| Math o Symudiad | Fixed (with tilt adjustment) |
Ffigur 4.1: Dimensiynau Technegol
5. Gosod a Gosod
Follow these steps for a secure installation. It is recommended to have two people for installation, especially when mounting the display.
- Paratowch y teledu: Attach the pre-assembled mount brackets to the back of your television using the appropriate screws from the mounting hardware kit. Ensure the VESA holes on your TV match the mount's compatibility (50x50mm to 400x400mm). Make sure no connectors on the TV are covered by the mount.
- Marciwch Bwyntiau Drilio Wal: Hold the wall plate of the mount against the desired position on your wall. Use a pencil to mark the drilling points through the holes on the wall plate. Use the included spirit level to ensure the marks are perfectly horizontal.
- Tyllau Dril: Drill holes at the marked points on the wall. The drill bit size will depend on the type of wall and the anchors you are using. Insert the appropriate wall anchors into the drilled holes.
- Plât Wal Mowntio: Securely screw the wall plate to the wall using the appropriate screws and washers from the hardware kit. Ensure it is firmly attached and level.
- Crogwch y teledu: Carefully lift the television (with the attached brackets) and hook the brackets onto the wall plate. Ensure the TV is securely seated on the wall mount.
- Diogelwch y teledu: Use the safety screws or locking mechanisms (if present on your specific model) to secure the TV to the wall mount, preventing accidental dislodgement.
Figure 5.1: Assembled Wall Mount
Ffigur 5.2: Ochr View of Wall Mount
6. Gweithredu
This wall mount features a fixed design with a tilting capability. Once the TV is mounted, you can adjust the tilt angle to achieve the optimal viewing experience. The tilt mechanism allows for a slight downward angle, which can help reduce glare from overhead lighting.
- Addasu Tilt: Gently push or pull the bottom of the TV to adjust the tilt angle. The mount is designed for smooth, continuous adjustment within its specified range.
7. cynnal
Regular maintenance ensures the longevity and safety of your wall mount.
- Glanhau: Sychwch y mowntiad gyda lliain meddal, sych. Peidiwch â defnyddio glanhawyr sgraffiniol na thoddyddion.
- Gwiriadau Cyfnodol: Periodically check all screws and connections to ensure they remain tight and secure. Over time, vibrations or movement can cause screws to loosen.
- Archwiliad Difrod: Inspect the mount for any signs of damage or wear. If any damage is found, discontinue use and contact customer support.
8. Datrys Problemau
Os byddwch chi'n dod ar draws problemau yn ystod neu ar ôl y gosodiad, cyfeiriwch at yr atebion cyffredin hyn.
- Teledu Ddim yn Lefel: Ensure the wall plate is perfectly level before drilling. If the TV is already mounted, you may need to slightly adjust the wall plate or use shims if minor adjustments are needed. Re-check all connections.
- Mae'r Mynydd yn Teimlo'n Rhydd: Re-tighten all screws securing the wall plate to the wall and the brackets to the TV. Ensure you are using appropriate anchors for your wall type.
- Anhawster Gogwyddo: Check for any obstructions behind the TV. Ensure the tilt mechanism is not overtightened (if applicable) or damaged.
- Rhannau Coll: Refer to the 'Package Contents' section. If parts are missing, contact TecTake customer support immediately.
9. Gwarant a Chefnogaeth
TecTake products are designed for quality and durability. For information regarding warranty coverage and customer support, please refer to your purchase documentation or visit the official TecTake websafle.
Polisi Dychwelyd: This product is typically eligible for a refund or replacement within 30 days of purchase, subject to the retailer's return policy.
For further assistance, please contact TecTake customer service.