TFA-Dostmann Bingo Radio-Controlled Alarm Clock

Rhagymadrodd

The TFA-Dostmann Bingo Radio-Controlled Alarm Clock (Model 60.2528.02) is designed for intuitive and easy use. It features a clear display, silent operation, and an automatic LED backlight for visibility at night. The alarm function offers a gentle wake-up with a gradual increase in intensity. Two distinct alarm times can be set simultaneously using dedicated side switches, with a color indicator showing activation status. This alarm clock also displays the day of the week, date, and ambient room temperature, helping to maintain an optimal sleeping environment (ideally between 16°C and 18°C).

Ffigur 1: Blaen view of the alarm clock showing the display and control buttons.

Gosod

1. Gosod Batri

The alarm clock requires 2 AA batteries (included). To install or replace batteries:

1. Lleolwch glawr adran y batri ar gefn yr uned.
2. Sleidwch y clawr yn agored.
3. Mewnosodwch 2 batris AA, gan sicrhau polaredd cywir (+/-).
4. Caewch y clawr adran batri yn ddiogel.

Ffigur 2: Cefn view with battery compartment and controls.

2. Initial Power-On and Radio Control Synchronization

Upon battery installation, the clock will automatically attempt to synchronize with the radio-controlled time signal. This process may take several minutes. Ensure the clock is placed away from electronic interference for optimal reception.

• The radio signal icon on the display will flash during synchronization.
• Once synchronized, the icon will become solid, and the correct time, date, and day of the week will be displayed.
• If synchronization fails, the clock will operate as a standard quartz clock. You can manually set the time (see 'Setting Time Manually').

Cyfarwyddiadau Gweithredu

1. Setting Time Manually (if radio control is unavailable)

If the radio-controlled time signal is not received, you can set the time manually:

1. Pwyswch a dal y GOSOD button on the back of the clock until the hour digits flash.
2. Defnyddiwch y + or - buttons on the front to adjust the hour.
3. Gwasgwch GOSOD again to confirm the hour and move to minutes.
4. Defnyddiwch y + or - botymau i addasu'r cofnodion.
5. Parhewch i bwyso GOSOD to cycle through and adjust year, month, day, and 12/24-hour format as needed.
6. Gwasgwch GOSOD one last time or wait a few seconds for the settings to save.

2. Gosod Larymau (Larwm 1 a Larwm 2)

Mae'r cloc yn cynnwys dau larwm annibynnol.

1. Gwasgwch y SET 1 botwm (ar gyfer Larwm 1) neu SET 2 button (for Alarm 2) on the front. The alarm time will appear on the display.
2. While the alarm time is displayed, press and hold the respective GOSOD botwm nes bod y digidau awr yn fflachio.
3. Defnyddiwch y + or - botymau i addasu'r awr larwm.
4. Pwyswch y priodol GOSOD botwm eto i gadarnhau'r awr a symud i funudau.
5. Defnyddiwch y + or - botymau i addasu munudau'r larwm.
6. Pwyswch y priodol GOSOD button one last time or wait a few seconds to save the alarm time.

3. Actifadu/Dadactifadu Larymau

Use the slider switches on the side of the clock to activate or deactivate each alarm.

• Slide the switch for Alarm 1 (bell icon with '1') to ON to activate. A color indicator will show it's active.
• Slide the switch for Alarm 2 (bell icon with '2') to ON to activate. A color indicator will show it's active.
• Llithro'r switsh i ODDI AR i ddadactifadu'r larwm.

Ffigur 3: Ochr view showing alarm activation switch.

4. Swyddogaeth Snooze

Pan fydd larwm yn canu, pwyswch y botwm mawr SNOOZE & LIGHT button on top of the clock to activate the snooze function. The alarm will pause for approximately 5 minutes and then sound again. This can be repeated multiple times.

5. Automatic Backlight

The clock features an automatic LED backlight for easy viewing mewn amodau ysgafn isel.

• Lleolwch y GOLAU AUTO switsh ar gefn y cloc.
• Llithro'r switsh i ON to enable the automatic backlight. A light sensor will detect ambient light levels and illuminate the display discreetly in the dark.
• Llithro'r switsh i ODDI AR to disable the automatic backlight.

Figure 4: Display with automatic backlight in a dark environment.

6. Arddangos Tymheredd

The integrated thermometer continuously measures and displays the ambient room temperature. No special settings are required for this function.

Cynnal a chadw

1. Glanhau

To clean the alarm clock, use a soft, dry cloth. Do not use abrasive cleaners, solvents, or chemical agents, as these may damage the display or casing.

2. Amnewid Batri

Replace batteries when the display becomes dim or functions become erratic. Always replace both batteries at the same time with new AA batteries. Dispose of used batteries responsibly according to local regulations.

Datrys problemau

• Dim arddangosfa neu arddangosfa dywyll: Check battery polarity. Replace batteries if they are low.
• Radio control not synchronizing: Move the clock to a different location, away from electronic devices that may cause interference. Ensure it is not near metal objects. Manual time setting is an alternative.
• Larwm ddim yn seinio: Ensure the alarm switch on the side is set to ON. Verify the alarm time is correctly set.
• Automatic backlight not working: Sicrhau y GOLAU AUTO switch on the back is set to ON. The backlight only activates in dark conditions.

Manylebau

Gwarant a Chefnogaeth

TFA-Dostmann products are manufactured with quality and precision. For warranty information, please refer to the documentation included with your purchase or visit the official TFA-Dostmann website. For technical support or inquiries, please contact TFA-Dostmann customer service.

Spare parts availability: 1 Year.