Hotone Nano Legacy British Invasion 5-Watt Compact Guitar Amp Llawlyfr Defnyddiwr Pen

1. Rhagymadrodd

The Hotone Nano Legacy British Invasion is a compact 5-watt guitar amplifier head designed to deliver classic British amplifier tones. This manual provides essential information for the safe and effective use of your amplifier. Please read it thoroughly before operation.

Nodweddion Allweddol:

Ultra-compact, portable amppen lifier.
Inspired by the legendary Vox AC30 amplifier tone.
Separate Volume and Gain control knobs.
EQ 3-band (Bas, Canol, Trebl) ar gyfer llunio tôn.
Integrated FX Loop for external effects integration.

2. Cyfarwyddiadau Diogelwch

Cyflenwad Pŵer: Use only the specified 18V DC power adapter (center negative). Incorrect voltaggall niweidio'r uned.
Awyru: Sicrhewch awyru digonol. Peidiwch â rhwystro agoriadau awyru.
Lleithder: Keep the unit away from water or excessive moisture.
Gwres: Osgowch osod yr uned ger ffynonellau gwres neu mewn golau haul uniongyrchol.
Glanhau: Glanhewch â lliain sych yn unig.
Gwasanaethu: Do not attempt to service this unit yourself. Refer all servicing to qualified personnel.

3. Cynnyrch Drosview

Hotone Nano Legacy British Invasion Amplifier Pen

Delwedd: The Hotone Nano Legacy British Invasion 5-Watt Compact Guitar Amp Head, showcasing its compact size and overall design.

Rheolaethau Panel Blaen:

Hotone Nano Legacy British Invasion Front Panel Diagram

Delwedd: Front panel of the Hotone Nano Legacy British Invasion amplifier head, showing input jack, EQ knobs (Bass, Middle, Treble), Gain, Volume, and Power switch. Each control is numbered and labeled for easy identification.

MEWNBWN: 1/4" mono jack for connecting your guitar.
BASS: Controls the low frequency response of your tone.
CANOL: Controls the mid frequency response of your tone.
TREBLE: Controls the high frequency response of your tone.
ENILL: Controls the pre-amp gain level, affecting distortion and sustain.
CYFROL: Yn rheoli cyfaint allbwn cyffredinol y ampllewywr.
Newid ON / OFF: Pweru'r uned ymlaen neu i ffwrdd.

Cysylltiadau Panel Cefn:

Hotone Nano Legacy British Invasion Rear Panel Diagram

Delwedd: Rear panel of the Hotone Nano Legacy British Invasion amplifier head, showing power input, Phones/Line Output, AUX In, FX Loop Send/Return, and Speaker Output. Each connection point is numbered and labeled.

18V DC: Power input for the included 18V DC adapter (center negative).
FFONAU / ALLBWN LLINELL: 1/8" stereo jack for headphones or direct recording.
AUX YN: 1/8" stereo jack for connecting an external audio player (e.g., smartphone, MP3 player) to play along with.
DYCHWELIAD DOLEN FX: 1/4" mono jack to connect the output of your effects pedal to the amplifier's power section.
ALLBWN SIARADWR: 1/4" mono jack for connecting to a speaker cabinet (4-16Ω impedance).
ANFON FX LOOP: 1/4" mono jack to send the pre-amp signal to your effects pedal's input.

4. Gosod a Chysylltiadau

Cysylltiad Pwer: Connect the supplied 18V DC power adapter to the "18V DC" input on the rear panel. Plug the adapter into a suitable power outlet.
Cysylltiad Gitâr: Plug your guitar into the "INPUT" jack on the front panel using a standard 1/4" instrument cable.
Cysylltiad Siaradwr: Connect the "SPEAKER OUTPUT" on the rear panel to your speaker cabinet using a speaker cable. Ensure your speaker cabinet has an impedance between 4 and 16 ohms. Rhybudd: Peidiwch â gweithredu'r amplifier without a speaker connected to the SPEAKER OUTPUT, as this can damage the unit.
Headphones/Line Out (Optional): For silent practice or direct recording, connect headphones or a recording interface to the "PHONES/LINE OUTPUT" jack. This will mute the speaker output.
AUX Input (Optional): To play along with backing tracks, connect your external audio device (e.g., smartphone, MP3 player) to the "AUX IN" jack using a 1/8" stereo cable.
Dolen FX (Dewisol): To integrate external effects pedals, connect the "FX LOOP SEND" to the input of your effects pedal and the output of your effects pedal to the "FX LOOP RETURN".

5. Cyfarwyddiadau Gweithredu

Pŵer Ymlaen: Ensure all connections are secure, then flip the "ON/OFF" switch to the ON position. The power indicator light will illuminate.
Gosodiadau Cychwynnol: Start with the "VOLUME" and "GAIN" knobs set to their minimum positions (fully counter-clockwise). Set the "BASS", "MIDDLE", and "TREBLE" knobs to the 12 o'clock position (neutral).
Ennill Addasu: Slowly increase the "GAIN" knob to achieve your desired level of overdrive or distortion. Higher gain settings will produce more saturated tones.
Addasu cyfaint: Once your gain is set, slowly increase the "VOLUME" knob to reach your desired listening level.
Tone Shaping with EQ:
- BASS: Adjust for low-end warmth and fullness.
- CANOL: Adjust for presence and cut in the mix. Lowering mids can create a "scooped" sound, while boosting them can make your guitar stand out.
- TREBLE: Adjust for brightness and clarity.
Pwer i ffwrdd: Before disconnecting any cables or the power supply, turn the "VOLUME" knob down and then flip the "ON/OFF" switch to the OFF position.

6. cynnal

Glanhau: Defnyddiwch lliain meddal, sych i lanhau tu allan y amplifier. Do not use liquid cleaners, aerosols, or solvents.
Storio: Storio'r ampstorio'r hylifydd mewn lle oer, sych i ffwrdd o olau haul uniongyrchol a thymheredd eithafol.
Cludiant: Wrth gludo, gwnewch yn siŵr bod y ampmae'r lifer wedi'i bacio'n ddiogel i atal difrod corfforol.
Gofal Cebl: Regularly check all cables for signs of wear or damage. Replace faulty cables immediately.

7. Datrys Problemau

Problem	Achos Posibl	Ateb
Dim allbwn sain	Pŵer heb ei gysylltu na'i droi ymlaen. Cebl gitâr yn ddiffygiol neu heb ei fewnosod yn llawn. Speaker cable faulty or not fully inserted. Anghydweddiad impedans siaradwr. Volume/Gain knobs set to minimum. Headphones connected to PHONES/LINE OUT.	Check power connection and ON/OFF switch. Ensure guitar cable is secure and functional. Ensure speaker cable is secure and functional. Verify speaker impedance is 4-16Ω. Increase Volume and Gain. Disconnect headphones if using speaker output.
Excessive hum or noise	Faulty power supply or ground loop. Gosodiadau enillion uchel. Ymyrraeth gan ddyfeisiau electronig eraill. Single-coil pickups (inherently more susceptible to hum).	Try a different power outlet or a high-quality isolated power supply. Reduce gain settings. Symud ampcadwr i ffwrdd o electroneg arall. Consider using humbucker pickups or a noise gate pedal.
Sain ystumiedig neu wan	Ceblau diffygiol. Cysylltiad siaradwr anghywir. Siaradwr wedi'i ddifrodi. Input signal too hot.	Gwiriwch a newidiwch geblau os oes angen. Ensure speaker cable is correctly connected and speaker impedance is correct. Test with a different speaker if possible. Reduce output from guitar or preceding pedals.

8. manylebau

Model:	TANLA1
Allbwn Wattage:	5 Wat
Ffynhonnell Pwer:	Trydan â Gwifrau (18V DC, canol negyddol)
Dyfeisiau Cydnaws:	Gitâr
Math o gysylltydd:	1/4" Jack (Input, Speaker Out, FX Loop), 3.5mm Jack (Phones/Line Out, AUX In)
Pwysau Eitem:	15.5 owns (tua 440 gram)
Dimensiynau Cynnyrch:	2.34 x 5.03 x 2.95 modfedd (tua 5.9 x 12.8 x 7.5 cm)
Math o ddeunydd:	Dur Di-staen
Lliw:	Du

9. Gwybodaeth Gwarant

Hotone products typically come with a limited manufacturer's warranty. For specific details regarding the warranty period, coverage, and terms for your Hotone Nano Legacy British Invasion amplifier head, please refer to the warranty card included with your purchase or visit the official Hotone websafle. Cadwch eich prawf prynu ar gyfer hawliadau gwarant.

10. Cefnogaeth i Gwsmeriaid

If you encounter any issues not covered in this manual or require further assistance, please contact Hotone customer support. You can usually find contact information, including email and phone numbers, on the official Hotone websafle.

Visit Hotone Audio Support Page (exampy ddolen, gall y ddolen wirioneddol amrywio)

HOTONE TANLA1