AIRAM 79W 80mm Linear Halogen Bulb

AIRAM 79W 80mm Linear Halogen Bulb Instruction Manual

Model: 79W 80mm Linear Halogen Bulb

1. Rhagymadrodd

This manual provides essential instructions for the safe installation, operation, and maintenance of your AIRAM 79W 80mm Linear Halogen Bulb. Please read this manual thoroughly before use and retain it for future reference.

2. Gwybodaeth Diogelwch

Dilynwch y rhagofalon diogelwch canlynol bob amser i atal anaf neu ddifrod:

  • Pwer i ffwrdd: Always ensure the power supply to the fixture is switched off at the mains before installing, removing, or cleaning the bulb.
  • Oeri i lawr: Allow the bulb to cool completely before handling. Halogen bulbs operate at high temperatures and can cause severe burns.
  • Trin yn gywir: Avoid touching the glass part of the bulb with bare hands. Oils from your skin can create hot spots, leading to premature failure. Use a clean cloth or gloves.
  • Wat Cywirtage: Defnyddiwch fylbiau gyda'r wat cywir yn unigtage a cyftage for your fixture. Exceeding the maximum wattage can cause overheating and fire.
  • Gwaredu: Gwaredu bylbiau a ddefnyddiwyd yn unol â rheoliadau lleol.
  • Defnydd Dan Do: Mae'r bylbiau hyn wedi'u cynllunio i'w defnyddio dan do oni nodir yn wahanol gan y gosodiad.

3. Cynnyrch Drosview

The AIRAM 79W 80mm Linear Halogen Bulb is an energy-efficient light source designed for various lighting applications. It provides a warm white light with a luminous flux of 1000 lumens, equivalent to a 100-watt incandescent bulb. Its linear design and R7s base make it suitable for specific linear halogen fixtures.

AIRAM 79W 80mm Linear Halogen Bulb

Image: A clear glass linear halogen bulb with white ceramic R7s end caps. The bulb features a filament running through its center and is designed for specific fixtures requiring an 80mm linear bulb.

4. Gosod a Gosod

Follow these steps to safely install your linear halogen bulb:

  1. Diffodd Pŵer: Locate the light fixture's power switch and turn it off. For added safety, switch off the circuit breaker supplying power to the fixture.
  2. Caniatáu Oeri: If replacing an old bulb, wait for it to cool down completely before touching it.
  3. Tynnwch yr Hen Fwlb (os yn berthnasol): Carefully remove the old bulb from the fixture. Linear halogen bulbs typically have spring-loaded contacts. Gently push one end of the bulb towards the opposite contact and then pull it out.
  4. Mewnosod Bwlb Newydd: Holding the new AIRAM bulb with a clean cloth or gloves, align one end of the bulb with one of the R7s contacts in the fixture. Gently push the bulb towards that contact, compressing the spring, and then guide the other end into the opposite contact. Ensure both ends are securely seated.
  5. Adfer Pwer: Once the bulb is securely in place, restore power to the fixture at the circuit breaker and then turn on the light switch.

5. Cyfarwyddiadau Gweithredu

The AIRAM 79W 80mm Linear Halogen Bulb operates immediately upon receiving power. Simply use the light switch connected to your fixture to turn the bulb on or off. No special operating procedures are required.

6. cynnal

Mae angen cynnal a chadw lleiaf posibl ar gyfer eich bylbiau halogen:

  • Glanhau: If the bulb becomes dusty, ensure the power is off and the bulb is cool. Gently wipe the glass with a soft, dry, lint-free cloth. Do not use liquid cleaners.
  • Amnewid: Replace the bulb when it reaches the end of its lifespan or fails. Refer to the installation section for replacement instructions.

7. Datrys Problemau

If your AIRAM halogen bulb is not functioning correctly, consider the following:

  • Nid yw'r bwlb yn goleuo:
    • Gwiriwch a yw'r switsh pŵer ymlaen.
    • Verify that the circuit breaker for the fixture is not tripped.
    • Ensure the bulb is correctly and securely seated in the fixture's contacts.
    • The bulb may have reached the end of its life and needs replacement.
  • Golau'n fflachio:
    • Check for loose connections in the fixture or bulb contacts.
    • Ensure the bulb is fully compatible with any dimmer switches in use.

If problems persist after checking these points, consult a qualified electrician.

8. manylebau

NodweddManyleb
BrandAIRAM
Math o OleuniHalogen
Nodwedd ArbennigYnni Effeithlon
Grym79 Wat
Maint Siâp BylbiauF10 (Linear 80mm)
Sylfaen BylbiauR7s (Based on product image)
Cyfwerth Gwynias100 Wat
Lliw GolauGwyn Cynnes
Cyftage220 folt (AC)
Fflwcs goleuol1000 Lumen
Label YnniArbed Ynni
Pwysau Eitem20 g
Nifer yr Unedau1.0 Cyfanswm

9. Gwarant a Chefnogaeth

For warranty information or technical support, please refer to the retailer or manufacturer's official websafle. Cadwch eich prawf prynu ar gyfer unrhyw hawliadau gwarant.

© 2023 AIRAM. All rights reserved.