Lexon LR98R1 Onoff LCD Alarm Clock User Manual

1. Rhagymadrodd

Diolch am brynuasing the Lexon LR98R1 Onoff LCD Alarm Clock. This manual provides detailed instructions for the proper setup, operation, and maintenance of your device. Please read this manual thoroughly before use and retain it for future reference.

The Lexon Onoff alarm clock features a unique design where flipping the clock activates or deactivates the alarm. It includes an LCD display with a blue electroluminescent backlight for clear visibility.

2. Gwybodaeth Diogelwch

• Peidiwch ag amlygu'r ddyfais i dymheredd eithafol, golau haul uniongyrchol, na lleithder uchel.
• Osgoi gollwng y ddyfais neu ei darostwng i effeithiau cryf.
• Do not attempt to disassemble or modify the alarm clock. This will void the warranty.
• Cadwch y ddyfais i ffwrdd o ddŵr a hylifau eraill.
• Gwaredwch fatris ail-law yn gyfrifol yn unol â rheoliadau lleol.
• Use only the specified battery type (2 x AAA).

3. Cynnwys Pecyn

Sicrhewch fod yr holl eitemau yn bresennol yn y pecyn:

• Lexon LR98R1 Onoff LCD Alarm Clock
• Llawlyfr Defnyddiwr (y ddogfen hon)

Nodyn: Nid yw batris AAA wedi'u cynnwys a rhaid eu prynu ar wahân.

4. Cynnyrch Drosview

Familiarize yourself with the components of your Lexon Onoff alarm clock.

Ffigur 1: Blaen view of the Lexon LR98R1 Onoff LCD Alarm Clock. The image displays the alarm clock in its red casing, with the LCD screen visible. The side labeled 'ON' is facing upwards, indicating the alarm is active. The clock has a minimalist rectangular design.

While specific button labels are not visible in the provided image, typical alarm clock controls are usually located on the back or sides. These generally include:

• Botwm Gosod Amser: To adjust the current time.
• Botwm Gosod Larwm: To adjust the alarm time.
• Hour/Minute Adjustment Buttons: To change hour and minute values.
• Botwm Ailatgoffa/Golau: To temporarily silence the alarm or activate the backlight.
• Adran Batri: Located on the back or bottom.

5. Gosod

5.1 Gosod Batri

1. Locate the battery compartment cover on the back or bottom of the alarm clock.
2. Llithrwch neu codwch y clawr i agor yr adran.
3. Mewnosodwch ddau (2) fatri AAA, gan sicrhau'r polaredd cywir (+ a -) fel y nodir y tu mewn i'r adran.
4. Amnewid y clawr adran batri yn ddiogel.

Note: Batteries are not included. Please use new AAA alkaline batteries for optimal performance.

5.2 Pŵer Cychwynnol Ymlaen

Once batteries are installed, the LCD display should illuminate, and the clock will typically start at a default time (e.g., 12:00 AM). You will then need to set the current time and alarm.

6. Cyfarwyddiadau Gweithredu

6.1 Gosod yr Amser Cyfredol

1. Pwyswch a dal y SET AMSER button (or similar, refer to device markings) until the hour digits begin to flash.
2. Defnyddiwch y AWR a COFNOD adjustment buttons to set the correct hour and minute.
3. Gwasgwch SET AMSER eto i gadarnhau ac ymadael â'r modd gosod amser.

6.2 Gosod Amser y Larwm

1. Pwyswch a dal y SET ALARM button (or similar) until the alarm hour digits begin to flash.
2. Defnyddiwch y AWR a COFNOD adjustment buttons to set your desired alarm time.
3. Gwasgwch SET ALARM again to confirm and exit alarm setting mode.

6.3 Activating/Deactivating the Alarm (Onoff Feature)

The Lexon Onoff alarm clock features a unique flip mechanism:

• I GWEITHREDU the alarm, place the clock with the side labeled "ON" facing upwards. An alarm icon should appear on the LCD display.
• I DIRPRWYOL the alarm, flip the clock so the side labeled "ODDI AR" is facing upwards. The alarm icon should disappear from the display.

6.4 Silencing the Alarm / Snooze Function

• Pan fydd y larwm yn swnio, pwyswch y SNOOZE / GOLAU button (usually a large button on top) to temporarily silence the alarm. The alarm will sound again after a few minutes (typically 5-10 minutes).
• To completely turn off the alarm for the day, flip the clock to the "ODDI AR" position.

6.5 Arddangos Backlight

Gwasgwch y SNOOZE / GOLAU button to activate the blue electroluminescent backlight for a few seconds, allowing you to view the time in low-light conditions.

7. cynnal

7.1 Glanhau

Wipe the surface of the alarm clock with a soft, dry cloth. Do not use abrasive cleaners, solvents, or chemical sprays, as these may damage the finish or electronic components.

7.2 Batri Newydd

When the display dims or the alarm function becomes unreliable, it is time to replace the batteries. Follow the battery installation steps in Section 5.1. Always replace both AAA batteries at the same time.

8. Datrys Problemau

9. manylebau

10. Gwarant a Chefnogaeth

The Lexon LR98R1 Onoff LCD Alarm Clock comes with a Gwarant gwneuthurwr 2 flynedd o'r dyddiad prynu. Mae'r warant hon yn cwmpasu diffygion mewn deunyddiau a chrefftwaith o dan ddefnydd arferol.

Nid yw'r warant yn cwmpasu:

• Difrod a achosir gan ddamwain, cam-drin, camddefnydd, llifogydd, tân, daeargryn, neu achosion allanol eraill.
• Damage caused by operating the product outside the permitted or intended uses described in this manual.
• Damage caused by service performed by anyone who is not an authorized representative of Lexon.
• Products or parts that have been modified to alter functionality or capability without the written permission of Lexon.

For warranty claims or technical support, please contact Lexon customer service through their official website or your retailer. Please have your proof of purchase and model number (LR98R1) ready.