D-Link GO-SW-8G

D-Link GO-SW-8G 8-Port Unmanaged Gigabit Desktop Switch

Llawlyfr Defnyddiwr

Rhagymadrodd

The D-Link GO-SW-8G is an 8-port unmanaged Gigabit desktop switch designed for small office and home office (SOHO) environments. This device facilitates network expansion by providing eight 10/100/1000 Mbps Ethernet ports, enabling high-speed data transfer for connected devices. It incorporates D-Link's Green Technology for energy efficiency, reduced heat generation, and extended product lifespan.

Gosod

Cynnwys Pecyn

Gwiriwch fod eich pecyn yn cynnwys yr eitemau canlynol:

  • GO-SW-8G device
  • Addasydd Pŵer

Cysylltu'r Swits

The GO-SW-8G is a plug-and-play device, requiring no software configuration for basic operation. Follow these steps to set up your switch:

  1. Cysylltiad Pwer: Connect the provided power adapter to the power input port on the rear panel of the GO-SW-8G switch and then plug the adapter into a standard electrical outlet.
  2. Cysylltiad Dyfais Rhwydwaith: Connect Ethernet cables from your network devices (e.g., computers, network-attached storage, routers) to any of the eight available RJ45 ports on the GO-SW-8G switch. The switch supports auto MDI/MDIX, so you can use either straight-through or crossover Ethernet cables.
  3. Dilysu: Once connected, the corresponding LED indicator for each active port will illuminate, indicating a successful link.
D-Link GO-SW-8G 8-Port Unmanaged Gigabit Desktop Switch

Image: D-Link GO-SW-8G 8-Port Unmanaged Gigabit Desktop Switch. This image displays the compact white design of the switch with its multiple Ethernet ports and power input.

Gweithredu

The D-Link GO-SW-8G operates as an unmanaged switch, meaning it requires no user configuration for its core functions. It automatically detects network speed and duplex mode for each connected device, providing optimal performance. The Gigabit Ethernet ports support data transfer rates of up to 1000 Mbps, facilitating fast communication within your local network.

Dangosyddion LED

The switch features LED indicators for each port and for power. These indicators provide visual feedback on the status of the switch and its connections:

  • Pwer LED: Yn goleuo pan fydd y switsh wedi'i droi ymlaen.
  • LEDs Cyswllt/Gweithgaredd (fesul porthladd):
    • Gwyrdd solet: Indicates a successful network link at Gigabit speed (1000 Mbps).
    • Ambr solet: Indicates a successful network link at Fast Ethernet speed (10/100 Mbps).
    • Fflachio: Yn dynodi gweithgaredd rhwydwaith (trosglwyddo neu dderbyn data) ar y porthladd hwnnw.
    • Wedi diffodd: No link detected or device is not powered on/connected.

Cynnal a chadw

To ensure optimal performance and longevity of your D-Link GO-SW-8G switch, follow these general maintenance guidelines:

  • Lleoliad: Place the switch in a well-ventilated area to prevent overheating. Avoid direct sunlight and heat sources.
  • Glanhau: Defnyddiwch frethyn meddal, sych i lanhau tu allan y switsh. Peidiwch â defnyddio glanhawyr hylif na glanhawyr aerosol.
  • Rheoli Ceblau: Gwnewch yn siŵr bod ceblau rhwydwaith wedi'u trefnu'n daclus a heb fod wedi'u plygu na'u straenio'n ormodol.
  • Cyflenwad Pŵer: Defnyddiwch yr addasydd pŵer a gyflenwir gyda'r ddyfais yn unig.

Datrys problemau

If you encounter issues with your D-Link GO-SW-8G switch, refer to the following common troubleshooting steps:

  • Dim pŵer:
    • Gwnewch yn siŵr bod yr addasydd pŵer wedi'i gysylltu'n ddiogel â'r switsh ac allfa drydanol sy'n gweithio.
    • Gwiriwch a yw'r soced pŵer yn gweithio trwy blygio dyfais arall i mewn.
  • Dim Golau Cyswllt:
    • Verify that the Ethernet cable is securely plugged into both the switch port and the network device.
    • Sicrhewch fod y ddyfais rhwydwaith gysylltiedig wedi'i phweru ymlaen ac yn gweithredu'n gywir.
    • Rhowch gynnig ar gebl Ethernet gwahanol i ddiystyru methiant cebl.
    • Profwch gyda phorthladd gwahanol ar y switsh.
  • Cyflymder Rhwydwaith Araf:
    • Confirm that all connected devices and cables support Gigabit Ethernet (1000 Mbps) for optimal performance.
    • Chwiliwch am draffig rhwydwaith gormodol neu gymwysiadau sy'n defnyddio llawer o led band yn rhedeg ar ddyfeisiau cysylltiedig.
    • Ensure the switch is placed in an area with adequate ventilation to prevent performance degradation due to overheating.

Manylebau

BrandD-Cyswllt
Rhif ModelGO-SW-8G/B
Nifer y Porthladdoedd8
Cyfradd Trosglwyddo Data1000 Megabytes Per Second (Gigabit)
Newid MathHeb ei reoli
RhyngwynebRJ45
Dyfeisiau CydnawsPC, Mac
Cyftage5 folt
Case Material TypePlastig
Pwysau Eitem0.3 Bunt

Gwybodaeth Gwarant

The D-Link GO-SW-8G switch comes with a Gwarant cyfyngedig 3 mlynedd. For detailed terms and conditions, please refer to the warranty card included with your product or visit the official D-Link websafle.

Cefnogaeth

For technical support, product registration, or to download the latest firmware and documentation, please visit the official D-Link support website. You can typically find support resources by searching for your product model (GO-SW-8G) on their site.

Swyddogol D-Link Websafle: www.dlink.com

© 2023 Corfforaeth D-Link. Cedwir pob hawl.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.