Tamiya US Battleship New Jersey BB-62 Model Kit Instruction Manual

1. Rhagymadrodd a Throsoddview

This manual provides detailed instructions for assembling the Tamiya 1:350 scale model kit of the US Battleship New Jersey (BB-62), as modernized in 1982. This kit accurately represents the Iowa-class battleship with its missile-carrying fit and updated features.

The kit includes a single-piece full hull, detailed deck surfaces with engraved plank texture, a fully rendered superstructure, and fine deck fittings. It features an updated weapons suite, including Harpoon and Tomahawk missile launchers, Phalanx CIWS, and SRBOC rocket launchers. Additional details include filigree mast lattice, SH-60B helicopters (with options for extended or stowed rotors), ship's boats, 16-inch projectiles, and Tomahawk missiles. A display stand with nameplates, metal propeller shafts, and stainless steel wire for rigging the Dicone-Cage antennae are also provided. Photo-etch detail parts enhance realism, covering helicopter deck fences, watertight doors, and various radar systems (SPS67, SPS49, SRA57, SRA58). A reference booklet detailing the ship's historical background is included. The completed model measures approximately 30.5 inches in length and comes with a printed paper flag sheet, starboard color profile, and decals for hull markings and the helipad.

2. Gosod a Chynulliad

2.1 Offer Angenrheidiol

The following tools are recommended for the assembly of your model kit:

• Tweezers (angled)
• Cyllell Torrwr
• Decal Scissors
• Side Cutters (for plastic parts)
• Masking Tape (10mm with dispenser)

2.2 Required Paints

A variety of Tamiya XF (flat), X (gloss), and TS (spray) acrylic paints are required for accurate coloring. Refer to the detailed paint chart provided in the kit for specific color codes and applications.

• XF-Acrylic Paints (Flat, 23ml): XF-1 (Black), XF-2 (White), XF-6 (Copper), XF-7 (Red), XF-9 (Hull Red), XF-19 (Sky Grey), XF-24 (Dark Grey), XF-50 (Field Blue), XF-53 (Neutral Grey), XF-56 (Metallic Grey), XF-57 (Buff), XF-63 (German Grey), XF-66 (Light Grey)
• X-Acrylic Paints (Gloss, 23ml): X-10 (Gun Metal), X-12 (Gold Leaf), X-13 (Metallic Blue)
• TS-Spray Paints (for Plastics, 100ml): TS-6 (Matte Black), TS-32 (Light Blue), TS-33 (Hull Red), TS-68 (Wooden Deck Tan)
• Ychwanegol: X-20A (Thinner 23ml)

2.3 Adhesives and Cement

Proper adhesives are crucial for a strong and clean assembly:

• Tamiya Plastic Cement (40ml)
• Tamiya Extra Thin Cement (40ml)
• Mark Fit (Strong) Decal Softener (40ml)
• Decal Adhesive Soft/Haftmittel (10ml)

2.4 Camau Cynulliad

Follow the step-by-step instructions provided in the included instruction booklet. Carefully cut parts from the sprues using side cutters, clean any excess plastic with a hobby knife, and assemble using appropriate plastic cement. Pay close attention to the orientation of parts and the sequence of assembly to ensure proper fit and structural integrity.

3. Finishing and Display

3.1 Peintio

Apply paints according to the color guide provided in your kit. Ensure surfaces are clean and dry before painting. Multiple thin coats are recommended for a smooth finish. Allow adequate drying time between coats.

3.2 Decal Application

Carefully cut out the desired decals from the sheet. Dip them in water for a few seconds until they can slide freely. Position the decal on the model and gently slide it into place. Use Mark Fit (Strong) or Decal Adhesive Soft/Haftmittel to help the decals conform to irregular surfaces and to prevent silvering. Blot excess water with a soft cloth or cotton swab.

3.3 Rigio

Use the provided stainless steel wire to rig the Dicone-Cage antennae and other mast details as indicated in the instruction manual. Refer to historical photographs or the kit's reference booklet for accurate rigging patterns.

3.4 Arddangos

Assemble the display stand and attach the completed model. Position the nameplates as desired. Ensure the display location is stable and away from direct sunlight or extreme temperatures.

4. cynnal

4.1 Glanhau

To maintain the appearance of your model, gently dust it regularly with a soft brush or compressed air. Avoid using harsh chemicals or abrasive materials, which can damage the paint and delicate parts.

4.2 Storio

Store the model in a cool, dry place away from direct sunlight, which can cause paint fading and material degradation. Protect it from excessive humidity and temperature fluctuations.

5. Datrys Problemau

5.1 Rhannau Ar Goll neu Wedi'u Difrodi

If you discover any missing or damaged parts upon opening the kit, please contact Tamiya customer support immediately. Provide the model number (TM78028) and a clear description of the issue.

5.2 Decal Issues (Silvering, Cracking)

If decals appear to 'silver' (show a clear film around the image), ensure the surface is glossy before application and use a decal setting solution like Tamiya Mark Fit. For cracking, ensure decals are not over-soaked and apply a clear coat after drying to protect them.

5.3 Poor Part Fit

Ensure all sprue gates are cleanly removed and mating surfaces are free of paint or debris. Dry-fit parts before applying cement. If gaps persist, use plastic filler or putty, then sand smooth before painting.

6. manylebau

7. Gwybodaeth Gwarant

This product is sold without an explicit warranty. For any issues regarding manufacturing defects or missing parts, please contact the retailer or Tamiya customer service directly upon discovery.

8. Cefnogaeth

For further assistance, technical support, or inquiries regarding your Tamiya US Battleship New Jersey BB-62 Model Kit, please refer to the official Tamiya website or contact their customer service department. Contact information can typically be found on the product packaging or the manufacturer's official online portal.