Atlanta 1380-4 Analog Alarm Clock User Manual

Cynnyrch Drosview

The Atlanta 1380-4 is a compact, analog alarm clock designed for tabletop use. It features a clear, easy-to-read dial with large numbers and luminous hands for visibility in low light. Powered by a quartz movement, it provides reliable timekeeping and an alarm function.

Mae blaen view of the Atlanta 1380-4 analog alarm clock. It features a white square dial with large black numbers from 1 to 12. The clock has black hour and minute hands with luminous green tips, a thin black second hand, and a light blue alarm hand. The brand name 'Atlanta' is printed below the 12 o'clock position, and 'QUARTZ ALARM' is printed above the 6 o'clock position. The clock casing is a dark grey plastic, with a silver-colored snooze/light button visible on the top.

Gosod

Gosod Batri

The clock requires one AA battery (not included).

1. Lleolwch glawr adran y batri ar gefn y cloc.
2. Tynnwch y clawr trwy ei lithro neu ei godi.
3. Insert one AA battery, ensuring the correct polarity (+ a -) fel y nodir y tu mewn i'r adran.
4. Amnewid y clawr adran batri yn ddiogel.

Gosod yr Amser

1. Locate the "TIME SET" knob on the back of the clock.
2. Rotate the knob clockwise or counter-clockwise until the hour and minute hands display the correct time.

Gweithrediad

Gosod y Larwm

1. Locate the "ALARM SET" knob on the back of the clock.
2. Rotate this knob to move the alarm hand (usually a thinner, distinct hand) to your desired alarm time.
3. Ensure the alarm ON/OFF switch (often a small slider or button) on the side or back of the clock is in the "ON" position.

Ailatgoffa / Swyddogaeth Ysgafn

The large button on top of the clock serves as both the snooze and light button.

1. When the alarm sounds, press the top button to activate the snooze function. The alarm will temporarily stop and sound again after approximately 5-10 minutes.
2. Press the top button at any time to illuminate the dial for a few seconds, allowing you to read the time in the dark.

Diffodd y Larwm

To permanently turn off the alarm, slide the alarm ON/OFF switch to the "OFF" position.

Cynnal a chadw

Glanhau

Wipe the clock's exterior with a soft, dry cloth. Do not use abrasive cleaners or solvents, as they may damage the plastic casing.

Amnewid Batri

Replace the battery when the clock's timekeeping becomes inaccurate or the alarm weakens. Follow the battery installation steps outlined in the "Setup" section.

Datrys problemau

Manylebau

Gwarant a Chefnogaeth

For information regarding warranty coverage and customer support, please refer to the documentation provided at the time of purchase or contact your retailer. Specific warranty terms may vary by region and retailer.