1. Rhagymadrodd
The BIC Acoustech PL-66 Surround Speakers are designed to deliver clear, dynamic sound for both music and home theater systems. Featuring an angled cabinet design for wide dispersion, these speakers are equipped with a 6.5-inch mid/high frequency aluminum dome horn tweeter, a 6.5-inch woofer with a heavy-duty surround, and a 5x7-inch passive radiator for enhanced bass output. The elegant enclosures feature hand-rubbed black lacquer tops and bottoms, providing a durable and aesthetically pleasingorffeniad g.
2. Cyfarwyddiadau Diogelwch
- Read all instructions before operating the speakers.
- Cadwch y cyfarwyddiadau hyn er mwyn cyfeirio atynt yn y dyfodol.
- Gwrandewch ar bob rhybudd ar y cynnyrch ac yn y cyfarwyddiadau gweithredu.
- Peidiwch â defnyddio'r offer hwn ger dŵr.
- Glanhewch â lliain sych yn unig.
- Peidiwch â rhwystro unrhyw agoriadau awyru. Gosodwch yn unol â chyfarwyddiadau'r gwneuthurwr.
- Peidiwch â gosod yn agos at unrhyw ffynonellau gwres fel rheiddiaduron, cofrestrau gwres, stofiau, neu gyfarpar arall (gan gynnwys amplifyddion) sy'n cynhyrchu gwres.
- Amddiffynnwch y llinyn pŵer rhag cael ei gerdded ymlaen neu ei binsio, yn enwedig wrth blygiau, cynwysyddion cyfleustra, a'r pwynt lle maent yn gadael y cyfarpar.
- Defnyddiwch atodiadau/ategolion a nodir gan y gwneuthurwr yn unig.
- Tynnwch y plwg o'r cyfarpar hwn yn ystod stormydd mellt neu pan na chaiff ei ddefnyddio am gyfnodau hir o amser.
- Cyfeirio pob gwasanaeth i bersonél gwasanaeth cymwys. Mae angen gwasanaethu pan fydd y cyfarpar wedi'i ddifrodi mewn unrhyw ffordd, fel llinyn cyflenwad pŵer neu blwg wedi'i ddifrodi, hylif wedi'i ollwng neu wrthrychau wedi disgyn i'r offer, mae'r cyfarpar wedi bod yn agored i law neu leithder, nid yw'n gweithredu'n normal , neu wedi cael ei ollwng.
3. Cynnwys Pecyn
Your BIC Acoustech PL-66 Surround Speakers package should include:
- 2 x BIC Acoustech PL-66 Surround Speakers
- Mounting brackets (pre-installed or included separately)
- Llawlyfr Cyfarwyddiadau (y ddogfen hon)
4. Gosod a Gosod
4.1 Lleoliad Siaradwyr
The PL-66 speakers are designed for use as surround or bookshelf speakers. Their angled cabinet design helps to disperse sound widely, creating an immersive listening experience. For optimal surround sound, place the speakers to the sides or slightly behind the main listening area, at or slightly above ear level.
Delwedd: Ongl view of the PL-66 speaker, highlighting its design for wide sound dispersion.
Consider the room acoustics and the distance from walls. Avoid placing speakers directly into corners, which can overemphasize bass. Experiment with placement to find the best sound balance for your listening environment.
Image: Product dimensions for planning placement. The speaker measures 14 inches deep, 7.25 inches wide, and 10 inches high.
4.2 Cysylltu â Amplifier / Derbynnydd
Sicrhewch eich ampllewywr neu dderbynnydd yn cael ei ddiffodd cyn gwneud unrhyw gysylltiadau.
- Prepare Speaker Wire: Strip approximately 1/2 inch (1.25 cm) of insulation from the ends of your speaker wires. Twist the bare strands tightly.
- Nodi Polaredd: Observe the polarity markings (+ and -) on both your speakers and your amplifier/receiver. It is crucial to connect positive (+) terminals on the amplifier to positive (+) terminals on the speakers, and negative (-) terminals on the amplifier to negative (-) terminals on the speakers. Incorrect polarity can result in poor sound quality and reduced bass response.
- Cysylltu â Siaradwyr: Unscrew the binding posts on the back of the PL-66 speaker. Insert the bare wire ends into the holes and tighten the binding posts securely.
- Cysylltwch â Amplifier/Derbynnydd: Connect the other end of the speaker wires to the corresponding surround speaker output terminals on your amplifier/receiver, maintaining correct polarity.
Image: Close-up of the rear panel showing speaker terminals and model information. Ensure correct polarity when connecting speaker wires.
4.3 Mowntio (Dewisol)
The PL-66 speakers are equipped with integrated mounting brackets for wall installation. Ensure that the wall can support the weight of the speakers (approximately 28 pounds each). Use appropriate wall anchors (not included) for secure mounting.
- Marcio Pwyntiau Mowntio: Hold the speaker against the wall at the desired location and mark the positions for the mounting screws through the brackets.
- Gosod Anchors: Drill pilot holes and install appropriate wall anchors if mounting into drywall. If mounting into a stud, drill pilot holes only.
- Siaradwyr Diogel: Attach the speakers to the wall using screws that engage with the anchors or studs. Ensure they are firmly secured before releasing.
Delwedd: Cefn view of the speaker showing the integrated mounting brackets for wall installation.
5. Gweithrediad
Once the speakers are properly connected to your amplifier/receiver, you can begin enjoying your audio. Follow these general guidelines:
- Pŵer Ymlaen: Trowch ar eich amphylifydd/derbynnydd a dewis y ffynhonnell fewnbwn briodol.
- Rheoli cyfaint: Dechreuwch gyda'r gyfrol ar lefel isel a'i chynyddu'n raddol i lefel gwrando gyfforddus.
- Gosodiadau Derbynnydd: If using a home theater receiver, access its setup menu to configure speaker sizes (typically 'small' for surround speakers), crossover frequencies (e.g., 80-120 Hz), and channel levels for optimal sound balance.
- Cyfnod torri i mewn: Like many speakers, the PL-66 may benefit from a break-in period of several hours of normal use to allow the drivers to loosen up and achieve their full sonic potential.
Delwedd: Blaen view of the PL-66 speaker with the grille on. The grille protects the drivers and can be removed for a different aesthetic.
6. cynnal
- Glanhau: Dust the speaker cabinets with a soft, dry cloth. For the black lacquer finish, a slightly damp cloth followed by a dry one can be used, but avoid harsh chemicals or abrasive cleaners.
- rhwyllau: The speaker grilles can be gently removed for cleaning. Use a soft brush or vacuum cleaner with a brush attachment to remove dust.
- Osgoi Lleithder: Do not expose the speakers to excessive moisture or direct sunlight, which can damage the finish and internal components.
- Diogelu Gyrwyr: Avoid touching the speaker drivers (woofer, tweeter, passive radiator) directly, as this can cause damage.
Delwedd: Blaen view of the PL-66 speaker with the grille removed, showing the drivers. Handle with care during cleaning.
7. Datrys Problemau
| Problem | Achos Posibl | Ateb |
|---|---|---|
| Dim sain gan siaradwyr | Gwifrau anghywir; Amplifier/receiver off or wrong input selected; Speaker wire disconnected or damaged. | Check all speaker wire connections for correct polarity and secure fit. Ensure amplifier/receiver is on and set to the correct input. Test with another audio source. |
| Sain ystumiedig neu aneglur | Goryrru amplifier; Loose speaker connections; Damaged speaker driver. | Reduce volume. Check speaker wire connections. Inspect speaker drivers for visible damage. |
| Bas gwan neu ddim bas o gwbl | Incorrect speaker polarity; Incorrect receiver settings (crossover, speaker size). | Verify correct speaker wire polarity (+ to + and - to -). Adjust receiver's speaker settings, ensuring surround speakers are set to 'small' and crossover is appropriate (e.g., 80-120 Hz). |
| Sound imbalance between speakers | Uneven speaker placement; Incorrect channel level settings on receiver. | Adjust speaker placement for symmetry. Use your receiver's channel level calibration feature to balance output. |
8. manylebau
| Enw Model | PL 66 |
| Brand | BIC |
| Math o Siaradwr | Bookshelf / Surround |
| Deunydd | Aluminum, Plastic, Wood |
| Dimensiynau Cynnyrch (D x W x H) | 14" x 7.25" x 10" |
| Pwysau Eitem | 28 pwys (yr un) |
| rhwystriant | 8 Ohms |
| Llefarydd Uchafswm Pŵer Allbwn | 175 Wat |
| Diamedr Woofer | 6.5 modfedd |
| Diamedr y Trydarwr | 6.5 Inches (Horn) |
| Ffurfweddiad Sianel Sain Amgylch | 5.1 (as surround speakers) |
| Technoleg Cysylltedd | Wired |
| Math Mowntio | Shelf Mount / Wall Mount |
9. Gwybodaeth Gwarant
The BIC Acoustech PL-66 Surround Speakers come with a Limited Warranty. Please refer to the warranty card included with your purchase or contact BIC customer support for specific terms and conditions regarding coverage and duration.
10. Cefnogaeth i Gwsmeriaid
For technical assistance, troubleshooting, or warranty inquiries, please contact BIC customer support. Refer to the contact information provided in your product packaging or visit the official BIC websafle am y manylion cymorth diweddaraf.
