Rhagymadrodd
This manual provides essential information for the safe and effective operation of your Cen-Tech 9 Volt Metal Detector 6-inch Wand Scanner. This device is designed to locate metal objects, particularly those embedded in wood, and can also serve as a security scanning tool. Please read this manual thoroughly before use and retain it for future reference.
Image: The Cen-Tech 9 Volt Metal Detector, a black handheld wand with yellow "CEN-TECH" branding.
Gwybodaeth Diogelwch
- Always operate the device in a safe manner.
- Peidiwch â gwneud y ddyfais yn agored i dymheredd neu leithder eithafol.
- Cadwch allan o gyrraedd plant.
- Gwaredu batris yn iawn yn unol â rheoliadau lleol.
- Do not attempt to modify or repair the device yourself. Refer to qualified service personnel.
Cynnwys Pecyn
- Cen-Tech 9 Volt Metal Detector Wand Scanner
- Achos Storio
- Llawlyfr Defnyddiwr (y ddogfen hon)
Note: A 9V battery is required for operation and is sold separately.
Gosod: Gosod Batri
The Cen-Tech Metal Detector requires one 9-volt battery for operation.
- Locate the battery compartment cover, typically on the handle or rear of the device.
- Llithrwch neu ddadglipiwch y clawr i agor yr adran.
- Insert a fresh 9-volt battery, ensuring the positive (+) and negative (-) terminals align correctly with the connectors inside the compartment.
- Amnewid y clawr adran batri yn ddiogel.
- Mae'r ddyfais bellach yn barod i'w defnyddio.
Cyfarwyddiadau Gweithredu
Pweru Ymlaen/Diffodd
- To turn the detector ON, slide the power switch to the "ON" position. You may hear a brief beep and see an LED light up, indicating it is active.
- To turn the detector ODDI AR, slide the power switch to the "OFF" position.
Detecting Metal
- Hold the wand scanner by the handle and sweep the 6-inch wand head slowly and steadily over the area you wish to scan.
- When metal is detected, the device will emit an audio alarm (a distinct beeping sound) and/or activate the LED visual alert (a flashing light). The intensity of the alarm may increase as you get closer to the metal object.
- Pinpoint the exact location by narrowing your sweep area once an alarm is triggered.
Lleihau Sensitifrwydd
- The detector features a 50% sensitivity reduction button. Press and hold this button to temporarily decrease the sensitivity of the detector. This is useful for scanning in areas with high levels of ambient metal or when trying to ignore smaller, less significant metal objects.
- Release the button to return to full sensitivity.
Rhybudd Batri Isel
- The device is equipped with a low battery alert. When the battery power is low, the detector's performance may diminish, and a specific indicator (e.g., a continuous low tone or a specific LED pattern) will activate.
- Replace the 9-volt battery immediately when the low battery alert is active to ensure optimal performance.
Nodweddion
- Detects metal embedded in wood.
- May also be used as a security scan device.
- 6-inch wand for one-pass coverage.
- Audio alarm and LED visual alert.
- 50% sensitivity reduction button.
- Rhybudd batri isel.
- Comes with a handy carrying case.
Cynnal a chadw
- Glanhau: Sychwch y synhwyrydd gyda lliain meddal, sych. Peidiwch â defnyddio glanhawyr sgraffiniol na thoddyddion.
- Storio: When not in use, store the detector in its provided carrying case in a cool, dry place, away from direct sunlight and extreme temperatures.
- Batri: Tynnwch y batri os na fydd y ddyfais yn cael ei defnyddio am gyfnod hir er mwyn atal gollyngiadau a difrod.
Datrys problemau
| Problem | Achos Posibl | Ateb |
|---|---|---|
| Nid yw'r synhwyrydd yn troi ymlaen. | Mae'r batri wedi marw neu wedi'i osod yn anghywir. | Gwiriwch bolaredd y batri. Amnewidiwch gyda batri 9V newydd. |
| Weak or inconsistent detection. | Low battery. Interference from other electronic devices. | Replace battery. Move away from other electronics. Ensure sensitivity reduction button is not pressed. |
| Constant alarm without metal present. | High ambient metal. Device too close to metal objects during power-on. | Move to an area free of metal to power on. Use the sensitivity reduction button. |
| No audio or LED alert. | Battery issue. Internal malfunction. | Check/replace battery. If problem persists, contact customer support. |
Manylebau
| Brand | Cen-Tech |
| Rhif Model | 94138 |
| Ffynhonnell Pwer | Batri 9V (heb ei gynnwys) |
| Math Canfod | Metel |
| Wand Size | 6 modfedd |
| Rhybuddion | Audio Alarm, LED Visual Alert, Low Battery Alert |
| Nodweddion Arbennig | 50% Sensitivity Reduction Button |
| Dimensiynau | 16.5 x 5 x 2 modfedd |
| Pwysau Eitem | 1.45 pwys |
| Deunydd | Wood, Metal (referring to detected materials) |
| Sgôr Diogelu Rhyngwladol | IP54 |
Gwarant a Chefnogaeth
Cen-Tech products are manufactured to high-quality standards. For information regarding warranty coverage, technical support, or replacement parts, please refer to the warranty card included with your purchase or visit the official Cen-Tech websafle. Cadwch eich derbynneb prynu fel prawf o brynu ar gyfer unrhyw hawliadau gwarant.
For further assistance, you may contact Cen-Tech customer service through their official channels. Always provide your product model number (94138) when seeking support.