Bosch Filtrino Warm Water Dispenser User Manual

1. Rhagymadrodd

This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your Bosch Filtrino Warm Water Dispenser, model THD2023. Please read this manual thoroughly before using the appliance for the first time and keep it for future reference. Proper use ensures optimal performance and extends the lifespan of your device.

2. Cyfarwyddiadau Diogelwch

Dilynwch y rhagofalon diogelwch canlynol bob amser i atal anaf neu ddifrod i'r offer:

• Gwnewch yn siŵr bod yr offer wedi'i gysylltu â soced pŵer wedi'i seilio.
• Peidiwch â throchi'r teclyn, y llinyn pŵer, na'r plwg mewn dŵr na hylifau eraill.
• Keep the appliance out of reach of children. The hot water dispensed can cause severe burns.
• Peidiwch â gweithredu'r teclyn os yw'r llinyn pŵer neu'r plwg wedi'i ddifrodi, neu os yw'r teclyn yn camweithio neu wedi'i ddifrodi mewn unrhyw ffordd.
• Place the appliance on a stable, flat, heat-resistant surface, away from edges and heat sources.
• Only fill the water tank with cold, potable water.
• Exercise caution when handling hot water and steam.
• Unplug the appliance before cleaning or when not in use for an extended period.

3. Cynnyrch Drosview

Familiarize yourself with the components of your Bosch Filtrino Warm Water Dispenser:

Ffigur 1: Blaen view of the Bosch Filtrino Warm Water Dispenser, showing the main unit, control panel, water tank, and dispenser spout.

• Tanc Dŵr: Removable tank for filling with water.
• Adran Hidlo: Located within the water tank, designed for the Brita Maxtra water filter.
• Panel Rheoli: Features temperature selection buttons and a Start/Stop button.
• Dispenser Spout: Where hot water is dispensed.
• Hambwrdd Diferu: Collects any drips or spills, removable for cleaning.
• Newid Pwer: On/Off switch, typically located at the base or rear of the unit.

4. Gosod

4.1 Dadbacio a Glanhau Cychwynnol

1. Tynnwch yr holl ddeunyddiau pecynnu a sticeri o'r teclyn.
2. Sychwch y tu allan i'r teclyn gyda hysbysebamp brethyn.
3. Wash the removable water tank and drip tray with warm, soapy water, then rinse thoroughly and dry.

4.2 Installing the Brita Water Filter

Your Filtrino comes with a Brita Maxtra water filter. Follow the filter manufacturer's instructions for preparing the filter before insertion. Typically, this involves soaking the filter in water for a few minutes.

1. Tynnwch y tanc dŵr o'r teclyn.
2. Insert the prepared Brita Maxtra filter firmly into the designated filter compartment within the water tank.
3. Refill the water tank with fresh, cold tap water.
4. Place the filled water tank back into the appliance, ensuring it is securely seated.

4.3 Defnydd Cyntaf / Paratoi

Before first use, or after a long period of inactivity, the appliance needs to be primed:

1. Ensure the water tank is filled with water and the filter is installed.
2. Place a large heat-resistant container (at least 500ml) under the dispenser spout.
3. Plygiwch y teclyn i mewn a'i droi ymlaen.
4. Select the highest temperature setting (e.g., 90°C or boiling).
5. Press the Start button to dispense water. Allow the appliance to dispense a full cycle of hot water. Discard this water.
6. Repeat this process once or twice to ensure the internal system is flushed and ready for use.

5. Cyfarwyddiadau Gweithredu

5.1 Pweru Ymlaen/Diffodd

• To turn on, press the power switch (usually indicated by I). The indicator light will illuminate.
• To turn off, press the power switch (usually indicated by O).

5.2 Gosod Tymheredd

The control panel allows you to select from various temperature settings:

• Press the 'temp. set' button repeatedly to cycle through available temperatures (e.g., 70°C, 80°C, 90°C, boiling, and room temperature).
• The selected temperature will be indicated by an illuminated light on the control panel.

5.3 Dosbarthu Dŵr

1. Place your cup or mug on the drip tray, centered under the dispenser spout.
2. Gwnewch yn siŵr bod y tanc dŵr wedi'i lenwi'n ddigonol.
3. Select your desired water temperature using the 'temp. set' button.
4. Press the 'start/stop' button to begin dispensing water. The appliance will heat and dispense water to the selected temperature.
5. To stop dispensing water at any time, press the 'start/stop' button again. This allows for manual adjustment of water quantity.

Ffigur 2: The Bosch Filtrino dispensing hot water into a glass, illustrating the water flow from the spout.

5.4 Child Lock (if applicable)

Some models may feature a child lock function. Refer to the specific markings on your appliance or a separate quick start guide for activation and deactivation instructions if this feature is present.

6. Cynnal a Chadw a Glanhau

Regular cleaning and maintenance ensure hygiene and prolong the life of your appliance.

6.1 Glanhau Dyddiol

• Tynnwch y plwg bob amser a gadewch iddo oeri cyn glanhau.
• Empty and clean the drip tray after each use or when full. Wash with warm, soapy water and rinse.
• Sychwch y tu allan i'r teclyn gyda meddal, damp brethyn. Peidiwch â defnyddio glanhawyr neu doddyddion sgraffiniol.

6.2 Amnewid Hidlydd Dŵr

The Brita Maxtra water filter should be replaced regularly according to the filter manufacturer's recommendations, typically every 4 weeks or after filtering a certain volume of water. A filter change indicator may be present on the appliance or filter itself.

1. Tynnwch y plwg oddi ar y teclyn.
2. Tynnwch y tanc dŵr.
3. Remove the used filter and dispose of it responsibly.
4. Insert a new, prepared Brita Maxtra filter as described in Section 4.2.
5. Refill the water tank and perform a priming cycle (Section 4.3) with the new filter.

6.3 Diraddio

Over time, mineral deposits (limescale) can build up inside the appliance, especially in hard water areas. Descaling is necessary to maintain performance and efficiency. The frequency depends on water hardness and usage.

• Use a descaling solution specifically designed for coffee machines or water dispensers, following the product's instructions.
• Alternatively, a solution of white vinegar and water (1:1 ratio) can be used.
• Llenwch y tanc dŵr gyda'r hydoddiant diraddio.
• Run several dispensing cycles until the tank is empty. Ensure a large container is used to collect the solution.
• After descaling, rinse the water tank thoroughly and fill it with fresh water. Run at least two full cycles with fresh water to flush out any remaining descaling solution.

7. Datrys Problemau

If you encounter issues with your Filtrino, consult the table below before contacting customer service.

8. manylebau

Key technical specifications for the Bosch Filtrino Warm Water Dispenser THD2023:

9. Gwarant a Chefnogaeth

Your Bosch Filtrino Warm Water Dispenser is covered by a manufacturer's warranty. Please refer to the warranty card included with your purchase for specific terms and conditions, including the warranty period and coverage details.

For technical assistance, spare parts, or to report a fault, please contact Bosch customer service. Contact information can typically be found on the Bosch official websafle neu yn nogfennaeth eich cynnyrch.

• Cymorth Ar-lein: Ewch i weld y Bosch swyddogol website for FAQs, product registration, and service contact details.
• Gwifren Gwasanaeth Cwsmer: Cyfeiriwch at eich manylion cyswllt Bosch lleol.