Loctite 5188 Gasket Sealant User Manual

Cynnyrch Drosview

The Loctite 5188 Gasket Sealant is an anaerobic flange sealant designed for rigid iron, aluminum, and steel flanged mating surfaces. It cures when confined in the absence of air between close-fitting metal surfaces. This product provides a flexible, solvent-resistant seal that will not tear or degrade. It is ideal for sealing close-fitting joints between rigid metal faces and flanges.

Ffigur 1: A red tube of Loctite 5188 Flange Sealant, 50ml size, with white cap and nozzle. The label clearly shows 'LOCTITE 5188 FLANGE SEALANT' and 'NET 1.69 FL. OZ. (50 ml)'.

Gwybodaeth Diogelwch

Always read the Material Safety Data Sheet (MSDS) prior to use. This product contains chemicals that may be harmful if misused. Keep out of reach of children. Use in a well-ventilated area.

• Osgowch gysylltiad â'r croen a'r llygaid. Os bydd cysylltiad, rinsiwch ar unwaith gyda digon o ddŵr a cheisiwch gyngor meddygol.
• Do not ingest. If swallowed, do not induce vomiting; call a physician immediately.
• Gwisgwch offer amddiffynnol personol (PPE) priodol fel menig a sbectol diogelwch.
• Storio mewn lle oer, sych i ffwrdd o olau haul uniongyrchol a ffynonellau gwres.

Gosod a Pharatoi Arwyneb

1. Arwynebau Glân: Ensure all mating surfaces are clean, dry, and free from oil, grease, and old gasket material. Use a suitable solvent cleaner if necessary.
2. Roughen Surfaces (Optional): For best adhesion, lightly abrade smooth surfaces with an abrasive pad or fine sandpaper, then clean again.
3. Gwirio Ffit: Verify that the parts to be sealed fit closely together. This product is designed for close-fitting metal surfaces.

Operating Instructions (Application)

1. Dosbarthu Cynnyrch: Apply a continuous bead of Loctite 5188 to one of the flange faces. Ensure complete coverage around all bolt holes and mating surfaces.
2. Cydosod Rhannau: Assemble the components immediately after application. Light clamping is recommended to ensure intimate metal-to-metal contact.
3. Amser iachâd:
   • Amser y Gêm: The product will fixture (become tack-free) in approximately 20 minutes at room temperature (22°C / 72°F).
   • Iachâd Llawn: Full cure is typically achieved within 24 hours.
   • Nodyn: Cure speed can vary depending on the substrate material, bondline gap, and temperature. Active metals like brass or copper will cure faster, while passive substrates like stainless steel may require an activator (e.g., Loctite 7649) for faster cure.
4. Profi: Allow sufficient cure time before subjecting the assembly to operational pressures or temperatures.

Cynnal a Chadw a Storio

• Storio: Store the product in its original container in a cool, dry location. Optimal storage temperature is between 8°C and 21°C (46°F and 70°F).
• Oes Silff: Cyfeiriwch at becynnu'r cynnyrch am wybodaeth benodol am oes silff.
• Glanhau: Uncured product can be cleaned with organic solvents. Cured product must be removed mechanically (e.g., scraping).
• Gwaredu: Dispose of product and packaging in accordance with local, regional, national, and international regulations.

Datrys problemau

Manylebau

• Math o Gynnyrch: Anaerobic Gasket Sealant
• Rhif Model: 1253203
• Cyfrol: 50 mL (1.69 fl. oz.)
• Lliw: Coch
• Amrediad Tymheredd: -65°F i 300°F (-54°C i 149°C)
• Amser y Gêm: Approximately 20 minutes (on steel)
• Amser iachâd Llawn: 24 awr
• Hyblygrwydd: Hyblyg Iawn
• Gwneuthurwr: Loctite (Henkel)
• Country of Manufacturer: Unol Daleithiau

Gwybodaeth Gefnogaeth

For technical assistance, product inquiries, or safety data sheets, please visit the official Loctite websafle neu cysylltwch â'u cymorth cwsmeriaid.

Loctite Official Websafle: www.loctite.com

Siop Brand Amazon: Visit the Loctite Store on Amazon