Progress Lighting 2-Light Flush Mount Ceiling Light Fixture User Manual

1. Rhagymadrodd

This manual provides comprehensive instructions for the safe installation, operation, and maintenance of your Progress Lighting 2-Light Flush Mount Ceiling Light Fixture, Model P3925-09. This fixture is designed to provide ambient illumination in various interior spaces such as kitchens, hallways, bedrooms, and living rooms. Please read all instructions carefully before beginning installation.

Figure 1: Progress Lighting 2-Light Flush Mount Ceiling Light Fixture (Model P3925-09)

2. Gwybodaeth Bwysig am Ddiogelwch

Er mwyn lleihau'r risg o dân, sioc drydanol, neu anaf personol, dilynwch y rhagofalon diogelwch sylfaenol hyn bob amser:

• RHYBUDD: Turn off electrical power at the circuit breaker or fuse box before installing or servicing the fixture.
• Rhaid i bob cysylltiad trydanol fod yn unol â chodau lleol, ordinhadau, neu'r Cod Trydan Cenedlaethol (NEC). Ymgynghorwch â thrydanwr cymwys os nad ydych yn gyfarwydd â gosodiadau gwifrau trydanol priodol.
• Bwriedir y gosodiad hwn ar gyfer defnydd dan do yn unig.
• Do not install this fixture in wet locations. It is cCSAus damp-location listed, suitable for damp environments like bathrooms or covered porches, but not direct water exposure.
• Always use bulbs of the correct wattage and type as specified in the product specifications.
• Trin cydrannau gwydr yn ofalus i atal torri.
• Rhybudd Cynnig 65: Gall y cynnyrch hwn gynnwys cemegolion sy'n hysbys i Dalaith California i achosi canser a namau geni neu niwed atgenhedlu eraill.

3. Cynnwys Pecyn

Verify that all components listed below are present and undamaged before proceeding with installation. If any parts are missing or damaged, do not attempt to assemble or install the fixture. Contact customer support for assistance.

Figure 2: Diagram of fixture components and assembly steps.

Cydrannau wedi'u Cynnwys:

• Mounting strap for outlet box
• Mounting hardware (screws, wire nuts)
• Fixture body with pre-wired electrical leads
• Alabaster glass dome shade
• Decorative finial
• Taflen cyfarwyddiadau gosod

Nodyn: Nid yw bylbiau golau wedi'u cynnwys a rhaid eu prynu ar wahân.

4. Cyfarwyddiadau Gosod

Follow these steps to install your ceiling light fixture. It is recommended to have a second person assist during installation to ensure safety and ease of handling.

1. Diffodd Pŵer: Before starting, ensure the electrical power to the junction box is turned off at the main circuit breaker or fuse box.
2. Paratoi Mowntio: Attach the mounting strap to the outlet box using the provided screws. Ensure the mounting strap is securely fastened.
3. Cysylltiadau Gwifren: Carefully connect the fixture's electrical wires to the corresponding house wires using the provided wire nuts.
   • Cysylltwch y wifren ddu o'r gosodiad â'r wifren ddu (poeth) o'r blwch allfa.
   • Cysylltwch y wifren wen o'r gosodiad â'r wifren wen (niwtral) o'r blwch allfa.
   • Connect the copper ground wire from the fixture to the green or bare copper ground wire from the outlet box.
   Sicrhewch fod pob cysylltiad yn ddiogel.
4. Corff Gosod Mowntio: Carefully tuck the wires into the outlet box. Align the fixture body with the mounting strap and secure it using the provided screws.
5. Gosod Bylbiau Golau: Screw two 75-watt maximum, medium base (E26) bulbs or LED equivalents (sold separately) into the sockets.
6. Atodwch Gysgod Gwydr: Place the alabaster glass dome shade onto the fixture body. Secure it with the decorative finial by screwing it onto the threaded rod at the bottom of the fixture. Do not overtighten.
7. Adfer Pwer: Once installation is complete, turn the electrical power back on at the circuit breaker or fuse box.

Figure 3: Detailed installation sheet for Model P3925-09.

5. Operating Your Light Fixture

This fixture operates like a standard ceiling light. Once installed and power is restored, it can be controlled via a wall switch (not included).

• Ymlaen / i ffwrdd: Defnyddiwch y switsh wal cysylltiedig i droi'r gosodiad golau ymlaen neu i ffwrdd.
• pylu: If using dimmable bulbs and a compatible dimmer switch (both sold separately), you can adjust the light intensity to create your desired ambiance.

6. cynnal

Bydd cynnal a chadw rheolaidd yn helpu i gadw ymddangosiad a swyddogaeth eich gosodiad golau.

• Glanhau: To clean the fixture, turn off the power and allow it to cool. Wipe the metal parts with a soft, dry cloth. Clean the glass shade with a mild glass cleaner and a soft cloth. Avoid abrasive cleaners or pads, as they may damage the finish.
• Amnewid Bylbiau:
  1. Turn off the power to the fixture at the circuit breaker.
  2. Carefully unscrew the decorative finial at the bottom of the glass shade.
  3. Remove the glass shade.
  4. Unscrew the old bulbs and replace them with new 75-watt maximum, medium base (E26) bulbs or LED equivalents.
  5. Reattach the glass shade and secure it with the decorative finial.
  6. Adfer pŵer i'r gosodiad.

7. Datrys Problemau

If your fixture is not operating correctly, refer to the following table for common issues and solutions:

8. Manylebau Cynnyrch

Figure 4: Dimensional drawing of the fixture, showing 13-1/4" diameter and 5-7/8" height.

Ffigur 5: Agos view of the brushed nickel finial at the base of the glass shade.

Ffigur 6: Agos view of the brushed nickel rim of the fixture.

9. Gwybodaeth Gwarant

This Progress Lighting fixture is backed by a Gwarant cyfyngedig 1 mlynedd. This warranty covers defects in materials and workmanship under normal use and service. For specific terms and conditions, please refer to the warranty documentation included with your product or contact Progress Lighting customer support.

10. Cefnogaeth i Gwsmeriaid

For further assistance, technical support, or to inquire about replacement parts, please visit the official Progress Lighting store or contact their customer service department.

Progress Lighting Store: Ymweld â'r Siop