ProSource JL-45891-3L Digital Electronic Safe User Manual

1. Rhagymadrodd

This manual provides detailed instructions for the safe and efficient operation, setup, and maintenance of your ProSource JL-45891-3L Digital Electronic Safe. Please read this manual thoroughly before using the product and retain it for future reference.

The ProSource JL-45891-3L Digital Electronic Safe is designed to provide secure storage for your valuables. It features a digital electronic keypad for access and is constructed from solid steel with a powder coating finish for durability.

2. Gwybodaeth Diogelwch

RHYBUDD:

• This safe is NOT fireproof. Do not store highly flammable materials inside.
• Keep emergency backup keys in a secure location away from the safe.
• Gwnewch yn siŵr bod y sêff wedi'i osod yn ddiogel i atal ei symud heb awdurdod.
• Do not attempt to force the safe open if the electronic lock malfunctions. Refer to the troubleshooting section or contact support.
• Cadwch fatris allan o gyrraedd plant.

3. Cynnwys Pecyn

Gwiriwch fod yr holl eitemau a restrir isod wedi'u cynnwys yn eich pecyn:

• 1 x Digital Electronic Safe (Model: JL-45891-3L)
• 4 x Batris AA
• 2 x Emergency Back-Up Keys
• 4 x Anchor Bolts
• 1 x Llawlyfr Defnyddiwr (y ddogfen hon)

Figure 1: Mintcraft Digital Electronic Safe, showing the main unit with its electronic keypad and manual override knob.

4. Gosod

4.1. Gosod Batri

1. Lleolwch yr adran batri ar du mewn drws y sêff.
2. Mewnosodwch 4 batris AA, gan sicrhau polaredd cywir (+/-).
3. Caewch y clawr adran batri.

4.2. Gosod Cod Cychwynnol

1. With the safe door open, press the red reset button located on the inside of the door near the hinge. A beep will sound, and the indicator light will flash.
2. Enter your desired 3 to 8 digit code on the keypad.
3. Press the "E" or "#" button to confirm. The light will flash green, indicating the code is set.
4. Profwch y cod newydd gyda'r drws ar agor cyn ei gau.

4.3. Gosod y Sêff

The safe can be mounted to a wall or floor using the provided anchor bolts. Choose a secure, discreet location.

1. Mark the desired drilling points through the pre-drilled holes on the back or bottom of the safe.
2. Drill pilot holes in the wall or floor using an appropriate drill bit.
3. Align the safe with the drilled holes and secure it using the anchor bolts.
4. Gwnewch yn siŵr bod y sêff wedi'i gysylltu'n gadarn ac na ellir ei dynnu'n hawdd.

5. Cyfarwyddiadau Gweithredu

5.1. Opening the Safe with Digital Code

1. Rhowch eich cod personol 3 i 8 digid ar y bysellbad.
2. Press the "E" or "#" button.
3. If the code is correct, the green light will illuminate. Within 5 seconds, turn the knob clockwise to open the door.
4. If the code is incorrect, the yellow light will flash, and a beep will sound.

5.2. Agor y Sêff gyda'r Allwedd Argyfwng

In case of battery failure or forgotten code, the safe can be opened using the emergency key.

1. Locate the keyhole cover, usually hidden behind the keypad or a removable panel.
2. Tynnwch y clawr.
3. Insert the emergency key and turn it counter-clockwise while simultaneously turning the knob clockwise to open the door.
4. Once opened, replace the keyhole cover.

5.3. Cau a Chloi'r Sêff

To lock the safe, simply close the door and turn the knob counter-clockwise. The safe will automatically lock.

6. cynnal

• Amnewid Batri: Replace batteries annually or when the low battery indicator light (if present) illuminates. Always use 4 new AA batteries.
• Glanhau: Sychwch du allan y sêff gyda lliain meddal, damp brethyn. Peidiwch â defnyddio glanhawyr neu doddyddion sgraffiniol.
• Gofal Bysellfwrdd: Avoid pressing the keypad buttons with excessive force. Keep the keypad dry and free from dust.
• Iro: Periodically apply a small amount of lubricant to the door hinges and locking mechanism to ensure smooth operation.

7. Datrys Problemau

8. manylebau

9. Gwybodaeth Gwarant

Please refer to the product packaging or contact the manufacturer directly for specific warranty details. Typically, products are covered against defects in materials and workmanship for a limited period from the date of purchase.

10. Cefnogaeth i Gwsmeriaid

For technical assistance, replacement parts, or any questions regarding your Mintcraft Digital Electronic Safe, please contact your retailer or the manufacturer directly.

Note: Specific contact information may be found on the product packaging or the manufacturer's official websafle.