Stack-On PS-508 Extra Wide Strong Box Safe with Electronic Lock

Rhagymadrodd

Thank you for choosing the Stack-On PS-508 Extra Wide Strong Box Safe. This safe is designed to provide secure storage for your valuables, documents, and firearms. It features a durable alloy steel construction and an electronic lock for convenient access. Please read this manual carefully before setting up and operating your safe to ensure proper use and maximum security.

Gwybodaeth Ddiogelwch Bwysig

• Always keep the override keys in a secure location away from the safe. Do not store them inside the safe.
• Gwnewch yn siŵr bod y sêff wedi'i osod yn ddiogel i atal ei symud heb awdurdod.
• Do not store flammable materials or open containers of liquids inside the safe.
• Keep children away from the safe and do not allow them to play with the electronic keypad or keys.
• This safe is not fireproof or waterproof. Protect contents accordingly.

Cynnwys Pecyn

Gwiriwch y pecyn i sicrhau bod yr holl eitemau yn bresennol:

• Stack-On PS-508 Safe Unit
• Electronic Keypad (pre-installed)
• Diystyru Bysellau (2)
• Caledwedd Mowntio (bolltau)
• Llawlyfr Defnyddiwr (y ddogfen hon)

Gosod

1. dadbacio

Carefully remove the safe from its packaging. Inspect the safe for any signs of damage. If damaged, contact customer support immediately.

2. Gosod Batri

The electronic lock requires batteries to operate. Locate the battery compartment, typically on the inside of the safe door or behind the keypad. Insert the required number of fresh alkaline batteries, ensuring correct polarity. Close the battery compartment cover securely.

3. Gosod y Sêff

For optimal security, it is highly recommended to mount the safe to a wall, floor, or other secure surface. The PS-508 safe includes pre-drilled mounting holes on the back and bottom. Use the provided mounting hardware or appropriate fasteners for your specific installation surface.

Image: The Stack-On PS-508 safe with its door open, revealing the interior. The spacious interior can accommodate items such as a laptop, documents, and other small valuables. The electronic keypad is visible on the open door.

• Mowntio Wal: Position the safe against a wall, ideally aligning with wall studs for maximum stability. Mark the drilling points through the pre-drilled holes. Drill pilot holes and secure the safe using appropriate lag screws or bolts. Note: For wall mounting, larger bolts than those provided may be necessary for enhanced security.
• Mowntio Llawr: Place the safe in the desired location. Mark the drilling points through the pre-drilled holes on the bottom of the safe. Drill pilot holes into the floor and secure the safe using appropriate anchor bolts.

4. Gosod Cod Cychwynnol

Upon first use, you will need to set your personal access code. Refer to the specific instructions provided with your electronic lock for the exact procedure. Typically, this involves pressing a reset button (often inside the safe door), entering a new code, and confirming it. Choose a code that is easy for you to remember but difficult for others to guess.

Gweithredu'r Sêff

1. Opening the Safe with Electronic Lock

Delwedd: Manwl view of the electronic keypad and the manual override keyhole on the Stack-On PS-508 safe. The keypad features numbered buttons and indicator lights.

1. Enter your personal access code on the electronic keypad.
2. The green indicator light should illuminate, and you may hear a beep.
3. O fewn ychydig eiliadau, trowch y ddolen yn glocwedd (neu'n wrthglocwedd, yn dibynnu ar y model) i agor drws y sêff.
4. If an incorrect code is entered, the red indicator light will flash, and the safe will remain locked. After multiple incorrect attempts, the safe may enter a lockout period.

2. Opening the Safe with Override Key

In case of battery failure, forgotten code, or electronic lock malfunction, you can use the override key:

1. Locate the keyhole cover on the electronic keypad.
2. Remove the cover to expose the keyhole.
3. Insert one of the provided override keys into the keyhole and turn it to unlock the safe.
4. While the key is turned, rotate the handle to open the safe door.

3. Changing the User Code

To change your personal access code:

1. Agorwch y drws diogel.
2. Locate the reset button on the inside of the safe door or near the battery compartment. Press it.
3. While the indicator light is on (usually yellow or green), enter your new desired code (typically 3-8 digits).
4. Press the '#' or '*' button (refer to your specific lock's instructions) to confirm the new code.
5. Profwch y cod newydd gyda'r drws ar agor cyn ei gau i sicrhau ei fod yn gweithio'n gywir.

4. Rhybudd Batri Isel

When the batteries are low, the electronic lock may indicate this with a specific light pattern (e.g., a red light flashing after opening) or a series of beeps. Replace the batteries promptly to avoid being locked out.

Cynnal a chadw

1. Amnewid Batri

Replace batteries annually or when the low battery warning is indicated. Always use fresh, high-quality alkaline batteries of the specified type.

2. Glanhau

Glanhewch du allan y sêff gyda lliain meddal, damp cloth. Do not use abrasive cleaners or solvents, as these can damage the finish or electronic components. Keep the keypad free of dust and debris.

Datrys problemau

• Safe will not open with electronic code:
  • Sicrhewch fod batris yn ffres ac wedi'u gosod yn gywir.
  • Re-enter the code carefully, ensuring each digit is pressed firmly.
  • If the keypad is intermittent, try replacing the batteries even if no low battery warning is present.
  • Use the override key to open the safe if the electronic lock continues to malfunction.
• Keypad makes loud beeping sound: This is normal operation for some models, indicating key presses. There is typically no way to disable this sound.
• Concerns about unauthorized opening by impact: While the safe is designed for security, no safe is entirely impervious to determined attacks. Ensure the safe is securely mounted to a robust surface as instructed in the 'Mounting the Safe' section. Proper mounting significantly enhances resistance against forced entry attempts.
• Lost or forgotten code: Use the override key to open the safe. Once open, follow the 'Changing the User Code' instructions to set a new code.

Manylebau

Gwarant a Chefnogaeth

Am wybodaeth am warant neu gymorth technegol, cyfeiriwch at y ddogfennaeth sydd wedi'i chynnwys gyda'ch pryniant neu ewch i wefan swyddogol Stack-On website. Keep your purchase receipt as proof of ownership.