Progress Lighting P3689-44 Two-Light Close-to-Ceiling Fixture Instruction Manual

Rhagymadrodd

This manual provides detailed instructions for the safe installation, operation, and maintenance of your Progress Lighting P3689-44 Two-Light Close-to-Ceiling Fixture. Please read all instructions carefully before beginning installation and retain this manual for future reference.

The P3689-44 fixture features a clean design with elegant lines, complemented by a satin Oxford Silver finish and an etched alabaster style glass shade. Its unique twist-lock shade design allows for easy access for changing light bulbs without external hardware.

Gwybodaeth Diogelwch

RHYBUDD: Risg sioc drydanol. Datgysylltwch y pŵer wrth y blwch ffiwsiau neu'r torrwr cylched cyn ei osod neu ei wasanaethu.

RHYBUDD: For your safety, read and understand the information provided in this manual completely before attempting to assemble, install, or operate this product. Failure to do so could lead to electric shock, fire, or other injuries that could be hazardous or even fatal.

• Rhaid i bob cysylltiad trydanol fod yn unol â chodau lleol, ordinhadau, neu'r Cod Trydan Cenedlaethol (NEC).
• Ymgynghorwch â thrydanwr cymwys os ydych yn ansicr ynghylch gweithdrefnau gwifrau.
• Defnyddiwch gysylltwyr gwifren rhestredig UL/cUL yn unig.
• Peidiwch â bod yn fwy na'r uchafswm wattage wedi'i bennu ar gyfer y bylbiau.
• Sicrhewch fod y gosodiad wedi'i osod yn ddiogel i elfen strwythurol y nenfwd.

Cynnwys Pecyn

Carefully unpack your fixture and check that all parts are included. If any parts are missing or damaged, contact Progress Lighting customer service before proceeding.

• Corff gêm (1)
• Arlliw gwydr (1)
• Mounting hardware kit (1)
• Llawlyfr cyfarwyddiadau (1)

Gosod a Gosod

Offer Angenrheidiol (Heb eu Cynnwys):

• Phillips sgriwdreifer
• Tyrnsgriw pen gwastad
• Stripwyr gwifren
• Tâp trydanol
• Sbectol diogelwch

Camau Gosod:

1. Trowch y pŵer i ffwrdd: Before starting installation, ensure the power to the circuit is turned off at the main fuse box or circuit breaker.
2. Prepare mounting: Attach the mounting bracket to the junction box in the ceiling using the screws provided in the hardware kit. Ensure the bracket is securely fastened.
3. Gwifrau: Connect the fixture's wires to the house wires according to the following:
   • Cysylltwch y du gwifren gosodion i'r du gwifren tŷ (poeth).
   • Cysylltwch y gwyn gwifren gosodion i'r gwyn gwifren tŷ (niwtral).
   • Cysylltwch y copr noeth gwifren gosodiad (tir) i'r copr gwyrdd neu noeth (ground) house wire.
   Secure all connections with wire connectors and wrap with electrical tape for added safety.
4. Mount fixture body: Carefully push the wired fixture body up to the ceiling, aligning the screw holes on the fixture with the screws on the mounting bracket. Secure the fixture body in place with the decorative nuts or screws provided.
5. Gosod bylbiau: Insert two (2) 60-watt maximum medium base bulbs (not included) into the sockets. Do not exceed the recommended wattage.
6. Attach glass shade: Align the glass shade with the fixture body and twist it clockwise until it locks securely into place. The unique twist-lock design ensures the shade is held firmly without visible hardware.

Image: The Progress Lighting P3689-44 Two-Light Close-to-Ceiling Fixture, showcasing its Oxford Silver finish and etched alabaster style glass shade. The fixture is designed for flush mounting to the ceiling.

Cyfarwyddiadau Gweithredu

Once the fixture is fully installed and bulbs are in place, restore power at the main fuse box or circuit breaker. The fixture is operated via a standard wall switch (not included) connected to the circuit.

• Sicrhewch y wat cywirtage bulbs (max 60-watt medium base) are used to prevent overheating or damage.
• The fixture is designed for indoor use in dry locations only.

Cynnal a chadw

Glanhau:

To clean the fixture, ensure power is turned off. Wipe the fixture with a soft, dry cloth. Do not use abrasive cleaners, polishes, or solvents as they may damage the finish or glass. For the glass shade, a mild glass cleaner can be used sparingly on a cloth, then wiped dry.

Amnewid Bylbiau:

To replace bulbs, turn off power at the circuit breaker. Gently twist the glass shade counter-clockwise to remove it. Unscrew the old bulbs and replace them with new 60-watt maximum medium base bulbs. Reattach the glass shade by twisting it clockwise until secure.

Datrys problemau

Manylebau

Gwarant a Chefnogaeth

Mae'r gosodiad Goleuo Cynnydd hwn wedi'i orchuddio gan Gwarant gwneuthurwr 1 flynedd o'r dyddiad prynu. Mae'r warant hon yn cwmpasu diffygion mewn deunyddiau a chrefftwaith o dan ddefnydd arferol.

For warranty claims, technical support, or replacement parts, please contact Progress Lighting customer service. Keep your purchase receipt as proof of purchase.

Progress Lighting Customer Service: Cyfeiriwch at y Goleuadau Cynnydd swyddogol websafle neu becynnu cynnyrch am wybodaeth gyswllt gyfredol.