Cynnyrch Drosview
The Permatex 81160 Hi-Temp Red Form-A-Gasket Silicone Sealant is a high-performance silicone gasket maker designed for high-temperature applications and heavy-duty use. It forms a durable, flexible, and waterproof seal, resisting temperatures from -65°F to 650°F (-54°C to 343°C) intermittently. This product is ideal for creating formed-in-place gaskets or sealing pre-cut gaskets in various automotive and industrial applications.
Image: Permatex 81160 Hi-Temp Red Form-A-Gasket Silicone Sealant tube. This image shows the product packaging, a red tube of sealant with the Permatex logo and product name.
Gwybodaeth Diogelwch
Read all safety precautions before use. Do not handle until all safety instructions are understood.
Atal:
- Contains: Calcium carbonate, iron oxide.
- Cael cyfarwyddiadau arbennig cyn ei ddefnyddio.
- Defnyddiwch offer amddiffynnol personol yn ôl yr angen.
Ymateb:
- OS YN LLYGAD: Rinsiwch yn ofalus gyda dŵr am sawl munud. Tynnwch lensys cyffwrdd, os ydynt yn bresennol ac yn hawdd i'w gwneud. Parhewch i rinsio. Os bydd llid y llygaid yn parhau: Ceisiwch gyngor/sylw meddygol.
- OS AR Y CROEN: Wash with plenty of soap and water. If skin irritation or rash occurs: Get medical advice/attention. Wash contaminated clothing before reuse.
Storio:
- Diogelu rhag golau'r haul.
- Storio mewn lle wedi'i awyru'n dda.
- Storfa dan glo.
Gwaredu:
- Cael gwared ar gynnwys/cynhwysydd i waith gwaredu gwastraff cymeradwy.
- Cadwch allan o gyrraedd plant.
Image: Back of Permatex 81160 packaging. This image displays the detailed safety warnings, directions for use, and precautionary statements in English and Spanish.
Cyfarwyddiadau Cais
Paratoi:
- For best results, ensure surfaces are clean and dry.
Cais:
- Cut the nozzle to the desired bead size (typically 1/16" to 1/4" or 2 to 6mm).
- Apply a continuous bead of silicone to one surface, ensuring it surrounds all bolt holes.
- Cydosod rhannau ar unwaith tra bod y silicon yn dal yn wlyb.
- Finger tighten until material begins to squeeze out around the flange.
Curing and Finishing:
- Allow the sealant to dry for one hour, then tighten to torque specifications.
- Allow 24 hours for the sealant to fully cure before filling with fluids or returning to service.
- Replace the cap after use to prevent drying.
NOTE: Not recommended for use on head gaskets or parts in contact with gasoline.
Image: Formed-in-Place Gasket. A hand applies Permatex sealant to an engine component, demonstrating the application process for creating a gasket.
Ceisiadau a Awgrymir
Permatex 81160 Hi-Temp Red Form-A-Gasket Silicone Sealant is suitable for a variety of high-temperature and heavy-duty applications, including:
- Gorchuddion falf
- Sosbenni olew
- Timing covers
- Pympiau dŵr
- Thermostat housings
- Sosbenni trosglwyddo
Image: Suggested Applications. This banner image shows various engine components like valve covers and water pumps, highlighting the sealant's intended uses.
Manylebau
| Nodwedd | Manyleb |
|---|---|
| Deunydd | Silicôn |
| Lliw | Coch |
| Ffurflen Eitem | Hylif |
| Cyfrif Uned | 3.0 Owns Hylif |
| Gwrthiant Tymheredd | -65°F to 650°F (-54°C to 343°C) intermittent |
| Lefel Gwrthsefyll Dŵr | Dal dwr |
| Rhif Model yr Eitem | 81160 |
| Rhif Rhan Gwneuthurwr | 81160 |
| Gwlad Tarddiad | Tsieina |
Datrys problemau
If you encounter issues during or after application, consider the following:
- Gollyngiad: Ensure surfaces were thoroughly cleaned and dried before application. Verify that a continuous bead was applied and that parts were assembled while the silicone was still wet. Allow the full 24-hour cure time before exposing to fluids or service.
- Gludiad Gwael: Surface preparation is critical. Ensure all oil, grease, and old gasket material are removed. The sealant may not adhere properly to contaminated surfaces.
- Materion Curo: Ensure the product was stored correctly and is within its shelf life. Proper ventilation during curing is also important.
For persistent issues, refer to the Permatex websafle neu cysylltwch â chymorth cwsmeriaid.
Gwarant a Chefnogaeth
For information regarding product warranty, technical support, or frequently asked questions, please visit the official Permatex websafle neu cysylltwch â'u hadran gwasanaeth cwsmeriaid. Cadwch eich derbynneb prynu ar gyfer unrhyw hawliadau gwarant.