Intermatic Digital 7-Day Programmable Wall Switch Timer SS7C User Manual

Rhagymadrodd

The Intermatic SS7C Digital 7-Day Programmable Wall Switch Timer is designed to control lighting and heavy-duty loads such as fans and appliances. This timer offers precise control with up to six ON/OFF settings per day, totaling 42 settings per week. It features a digital clock, battery backup, and various programming options to suit your schedule.

Gwybodaeth Diogelwch

RHYBUDD: Risk of electric shock. Installation requires working with high voltage wiring. Always turn off power at the circuit breaker or fuse box before installation or servicing. If you are unsure about any part of these instructions, consult a qualified electrician. Do not exceed the electrical ratings of the device.

• Sicrhewch fod pŵer wedi'i ddatgysylltu cyn gosod.
• Dilynwch yr holl godau trydanol lleol a chenedlaethol.
• Mae'r ddyfais hon ar gyfer defnydd dan do yn unig.

Cynnwys Pecyn

Gwiriwch fod yr holl gydrannau yn bresennol cyn dechrau'r gosodiad:

• Intermatic SS7C Digital Wall Switch Timer Unit
• Sgriwiau Mowntio
• Cnau Gwifren
• Llawlyfr Cyfarwyddiadau (y ddogfen hon)

Gosod a Gosod

Offer Angenrheidiol: Screwdriver, Wire Strippers, Electrical Tape.

1. Diffodd Pŵer: Locate the circuit breaker or fuse that controls the power to the switch you are replacing. Turn it OFF. Verify power is off using a voltage profwr.
2. Dileu Switsh Presennol: Carefully remove the wall plate and unscrew the existing switch from the wall box. Disconnect the wires from the old switch. Note the wiring configuration (e.g., line, load, ground).
3. Wire the SS7C Timer: Connect the wires from the wall box to the SS7C timer using the provided wire nuts. Refer to the wiring diagram below for typical connections. Ensure all connections are secure.
   

   Delwedd: Blaen view of the Intermatic SS7C Digital Wall Switch Timer. This image shows the digital display and control buttons, which are essential for programming and operation.

   • Gwifren Llinell: Connect to the timer's LINE terminal.
   • Gwifren Llwytho: Connect to the timer's LOAD terminal.
   • Gwifren ddaear: Connect to the timer's GROUND terminal.
   • Gwifren Niwtral (os yn berthnasol): Some installations may require a neutral wire. Consult your local electrical codes.
4. Mount the Timer: Gently push the wired timer into the wall box. Secure it with the mounting screws. Attach the wall plate.
5. Adfer Pwer: Turn the power back ON at the circuit breaker or fuse box. The timer display should illuminate.

Gweithredu a Rhaglennu

The SS7C timer allows for flexible programming with up to 6 ON/OFF settings per day.

1. Gosod yr Amser a'r Diwrnod Cyfredol

1. Gwasgwch y CLOC botwm. Bydd yr arddangosfa amser yn fflachio.
2. Defnyddiwch y AWR a COFNOD botymau i addasu'r amser cyfredol.
3. Gwasgwch y DYDD botwm i osod diwrnod cyfredol yr wythnos.
4. Gwasgwch CLOC again to save and exit, or wait a few seconds for it to save automatically.

2. Programming ON/OFF Events

The timer supports up to 6 ON/OFF programs per day, for a total of 42 per week.

1. Gwasgwch y PROG botwm. Bydd yr arddangosfa yn dangos "1 ON".
2. Defnydd AWR, COFNOD, a DYDD buttons to set the desired ON time and day(s) for Program 1. You can select specific days (e.g., M, Tu, W, Th, F, Sa, Su), weekdays (M-F), weekends (Sa-Su), or all 7 days.
3. Gwasgwch PROG eto. Bydd yr arddangosfa yn dangos "1 OFF".
4. Set the desired OFF time and day(s) for Program 1 using the AWR, COFNOD, a DYDD botymau.
5. Ailadroddwch gamau 1-4 ar gyfer rhaglenni ychwanegol (2 YMLAEN/DIFFODD i 6 YMLAEN/DIFFODD).
6. Ar ôl gosod yr holl raglenni a ddymunir, pwyswch CLOC i ddychwelyd i weithrediad arferol.

3. Gwrthwneud Llawlyfr

To manually turn the connected device ON or OFF outside of programmed times, press the YMLAEN / I FFWRDD button. This will temporarily override the current program until the next scheduled ON or OFF event.

4. Random Setting Feature

The random setting feature can be activated to vary ON/OFF times slightly, creating a lived-in appearance when you are away. Consult the full manual for specific activation steps for the random feature.

Cynnal a chadw

The Intermatic SS7C timer is designed for low maintenance. The internal battery backup maintains programming for up to three years, even during power failures.

• Amnewid Batri: If the display becomes dim or programming is lost frequently during power outages, the internal battery may need replacement. This typically requires professional servicing or careful adherence to specific instructions not detailed here.
• Glanhau: Clean the timer's surface with a soft, damp brethyn. Peidiwch â defnyddio glanhawyr neu doddyddion sgraffiniol.

Datrys problemau

Manylebau

• Brand: Rhyngweithiol
• Rhif Model: SS7C
• Pwysau Eitem: 0.35 Bunt
• Nifer o Gosodiadau: 7-day programmable, up to 6 ON/OFF settings per day (42 per week)
• Maint y sgrin: 1.5 modfedd
• Lliw: Gwyn
• Gwneuthurwr: INTERMATIC INC
• UPC: 078275056732
• ASIN: B0000BYDA2

Gwarant a Chefnogaeth

This Intermatic SS7C Digital 7-Day Programmable Wall Switch Timer comes with a Gwarant gwneuthurwr cyfyngedig 1 flwyddyn o'r dyddiad prynu. Mae'r warant hon yn cwmpasu diffygion mewn deunyddiau a chrefftwaith o dan ddefnydd arferol.

For warranty claims, technical assistance, or further support, please contact Intermatic customer service. Keep your proof of purchase for warranty validation.

For the most up-to-date support information, please visit the official Intermatic websafle neu cyfeiriwch at y manylion cyswllt a ddarperir gyda phecynnu eich cynnyrch.